Why can not cut profiled grinder, a saw, a jigsaw. The best way to cut corrugated board

The popularity of corrugated board gained from - for low cost, ease of operation and ease of handling. With this material you can make a fence, instead of building sheathing siding (in cheaper) and t. D.

The material resembles a layer cake. The base layers of metal and decorative and protective type.

How to cut corrugated board, to maintain the integrity of the cutting material and save it from corrosion?

Bulgarian

Some use the grinder. For this tool, you need to buy a special disc for cutting the sheeting.

Should know about minuses: When the cut metal is heated, burns galvanized layer, sparks falling on the surface spoil profiled.

jigsaws

Does not recommend the use of jigsaws. He tears the edges of the material. The instrument itself quickly fails. Jig advised to use only a small cutout for challenging holes, grooves. To do this, use a special cloth on metal with minimal tooth height and pitch.

Circular Saw

At low speeds it does not burn or melt zinc polymer layer. At work cut out smooth and burr-free, sparks. But not everyone has the tools. Skills are also necessary. The tool is not suitable for cutting holes and other complex shapes.

electric scissors

The most easy-to-use tool. Quickly, accurately cut any trapezoidal sheet. Suitable for cutting polygonal, smooth curves, grooves, holes, and other forms. There is a battery and can work without electricity. But there is a minus - there are electric clippers are not cheap. For example, in Leroy Merlin, the price of 5000 RUB.

Since the corrugated board can not withstand the action of high temperatures, should be selected Cold cutting.

Master Tips - The Best Way

Masters are advised to simple construction knife with a conventional blade. There are such knives from 150 rubles. And in the bargain of 5 blades for replacement.

By the time it turns out as well as Bulgarian. Only it turns out perfectly cut smooth, burr-free and sparks. The knife is ideal for cutting along the sheeting. Pass the knife (pressing) on ​​the planned line and then simply bend by the scratch and break off any excess. It's simple, fast and does not require expensive special. instruments.

Across advised to cut with scissors for metal. They are also not expensive - from 120 rubles. Res turns neat and do not need to level the edges.

Channel RemontDom: SUBSCRIPTION. Thank you for huskies, thank you for your attention!