3 tips from readers. How to make a reusable fittings for soldering

Do yourself a homemade blender and cook as the propylene infrequently, I made an unfortunate mistake that fixed by drilling crown of the tree re-fitting. This method has shared in his article, but it turned out that many readers have their similar methods of solving this problem, about which they wrote.

drill down

Masters of reground drill down for recovery of the fitting. Tested this method, it gives a good result, I recommend.

The drill 19 Metal

Also felt this way but failed to keep the fitting in the hands until the drill switched to reverse, then drill the right. The most difficult, but the working method.

mill

This option is not checked, as these comments appeared much later, but in the video master, it is evident that the remains of the pipe cut without problems.

With this article I want to thank my readers, who share useful ideas, applied in practice. It is for this reason, comments do not close myself learning from the experience of the masters.

The scale of this article, not all comments were published, but I'll give links to articles and if you want you are viewing them.

And I ask you to speak, if you interested in this publication format?

How to make a reusable fittings for soldering

3 ways to help re-use the fitting

subscribe to the channel, Share the publication with your friends, like, put Like, soon a new publication. Your home renovation.