Useful content

How to make repairs and to "survive". Elementary User filler concrete blocks

click fraud protection

Good afternoon dear friends!

Did you know that the manufacturers of blocks called "Stone bread"? Which have become so popular and profitable in all respects - aerated concrete blocks!

They are easy to install, have the necessary thermal insulation properties, non-flammable and inexpensive! About these "zavozdushennyh blocks" write a lot, and talk show. And if from the perspective of the construction, for you, this information is useful only in theory, then from the inside (ie, in the works of finishing) are more interested in the practice! So today I am prepared and step by step instructions that will help you best Aerated concrete wall to prepare for further repair in the house.

Well, they are ready to independently (without the help of finishers Brigade) verify this?

1.Tools and materials. Before the start of such an exciting event it is important to organize the "base" of tools and materials needed in order not to complicate the permanent luting otvlekaniem from the process surface. Especially list of desired arsenal is not complicated:

instagram viewer
bucket (capacity), 2 spatula, broom (broom), rag and immediately she mixture for leveling and water. As soon as the auxiliary material is ready, you can safely get to work!

2.Stripping and preparation of the mixture. To begin with, "armed" with a spatula, start stripping the walls of the irregularities (spend a spatula from the bottom up and from left to right). Important! Hold the tool correctly! Therefore, place the "blade" on the palm and the index finger and middle finger press tool above. This position will allow you to save power. Though aerated concrete block material and easy, but the strength of concrete in it still maintained, so the process requires a certain pressure.

Next, prepare the mixture, mix it with water and observing the proportions specified on the packaging. Stir as necessary to convert the solution into a homogeneous mass without the "lumps"! The only thing not harvested a large amount because the mix dries fairly quickly (30-40 minutes). And yet, before re-applying, good clean bucket (capacity) to the dried mixture was not included in the fresh mortar.

3.Carrying the first layer. Start putty wall from top to bottom, and once you get to the middle of the wall, change direction, expanding the process to the trajectory of "bottom-up" in order to avoid irregularities. Work with 2 spatulas!

One you will spread the mixture, and the second shooting extra weight at first.

4.plaster angle. Working with the angles are always more complicated than a flat surface. Yes, and the process is slightly different! Namely, it is necessary to apply putty to the wall and align its horizontal motion, starting from the edge of the wall.

This allows you to keep clean adjoining wall.

5.The preparatory phase of the second layer. Allow time for drying of the first layer. Typically, this period lasts from 2 to 12 hours. It depends on the brand of "product" you are working and the temperature in the room.

During this time, perform cleaning tools with them to the exit to the next stage of work.

6.Applying a second layer. Once dry wall surface (white), pass through it dry spatula for cleaning irregularities newly acquired during application of the first layer. Sweep brush dust from the floor, and after wipe it with a damp cloth.

The second layer of putty apply motions, opposite the first (left to right / from right to left). This technique corrects incomplete filling of the furrows of the first layer and allows perfect drop his wall. Now only need to once again time for drying, and the surface will be ready to accept a new wallpaper or painting in color (and of course - do not forget the primer).

Earlier published materials:

How to make so you do not regret or 6 classic mistakes made when pasting the walls with wallpaper. their decisions
Do you know how to harmoniously combine different colors and shades of the walls, furniture and decorative elements. 8 design recommendations

IF YOU these tips will come in handy, or liked the article, be sure to click "THUMBS UP" OR SUBSCRIBEON CHANNEL !!

Thank you for your attention and I will be glad your comments!

Improper organization of water supply and sanitation

Improper organization of water supply and sanitation

Leaks and various types of blockages - this is not a tragedy. But the rusty water and the stench ...

Read More

3 best folk remedies for ants in the garden and in the house

3 best folk remedies for ants in the garden and in the house

They have no place at our sites! Photos from agronomu.comYou want to get rid of pesky ants occupy...

Read More

Pergolas with "highlight": The original idea for the joy of the household

Pergolas with "highlight": The original idea for the joy of the household

Sooner or later, but almost every owner of a country house think about the construction of the g...

Read More

Instagram story viewer