How to make the grinding trolley hand sharpening knife planer. My experience
It was necessary to sharpen the knife old Soviet plane. I have already had the experience of sharpening blades for elektrorubanka simple device, but for this problem, I decided to make a home-made cunning.
making
I took plate, spaced, drilled through-hole and cut, turned in a loop preform.
By the way, until done, came the familiar and suggested that this loop, but when he learned of the grinding carriage, was surprised and did not understand what it was about. Briefly told him the essence of venture, he quickly realized, because he understands the technique.
Assembly and components
It received two major plane that holds the pin, it and gripped by fixing structure at the desired angle. At first I found the gap between the simple homemade puck, but tight slots slid over her, had to cut from sandpaper washers, they decided to fix the problem.
The idea of using
Glued to the plane of the bar, it will set the angle of the knife, still thought to make wheels, but declined, deciding that the angle of the second plane will just slide on the glass.
In general, one edge of the truck will be designated with a knife sharpened on nazhdachku and the second slide glass on which is abrasive.
Tomorrow will be sharpened, and I see that this comes out, you go and see.
subscribe to the channel, Share the publication with your friends, like, put the Like. Your home renovation.