Adaptations for qualitative masonry bricks and blocks

IN this narrative I showed a number of tools that allow novice mason or even samostroyschiku without experience with brick masonry make a decent better than professionals. Because not to all the convenient format of slides for smartphones, the stand material in the article as amended.

In commercially available plastic, factory production form for the convenience of applying the solution to the brickwork. The forms are made so that the seam gets a little depressed inside - like a professional.

So this is a form to facilitate laying looks in reality. The seam of the solution gives a very smooth and the width and height. And most importantly - do it quickly, without overspending solution or fall with the masonry

The form of the same set to create a flat vertical joints. A vertical seam to do right - this experience is necessary.

A similar set of another manufacturer (TM Brick). Write that this device saves up to 40% of the solution, because it does not fall from the masonry.

Price online from the manufacturer (kirpich7777.ru). It has offices in the cities. I think if you are going to carry out a large amount of masonry brick, but do not have experience, then these costs will save time and hassle. And maybe money.

Video review for this accommodation. I believe that a set worthy of attention even professionals

This form can make the most of the wooden planks. But it will be harder to stick solution. Plastic will still be practical - it is easier to clean from the frozen solution.

When laying the pillars of the fence is convenient to do it on a metal rod. Controlled seam thickness and does not drop solution. In youtube there are many videos showing the reception laying on the bar. Nothing too complicated, but with the guarantee of the result for the beginner. Metal rods are purchased on

A similar but more expensive metal and versatile tool for laying bricks and blocks. The cost of "bite". I believe that this is not such an adequate price, though, and for a steel tool.

When laying the blocks must be used horizontally tensioned rope (cord-prichalku). For fixing at the corners can be done here such area. Although it is factory-made - all from the same mold TM Brick manufacturer.

For bricks can be purchased at aliekspress here is a set of plastic cord-fixing prichalku. Perhaps it weak spring and the device is not as effective as it seems - poorly kept on the brick.

Not always with masonry stands a pallet of bricks. Party for easy carrying bricks, there is such a seizure. In some embodiments, the grip can be adjusted to the desired amount of brick.

It is possible to make the most if there is a Bulgarian, and welder. Capture grips bricks. The more of them, the greater their lever clamps.

For porous masonry blocks exist glue boxes. But because geometry such blocks "dancing", the builders put them on the same plastic solution, as a conventional brick. Ideally, you want to do it on the solution, mixed perlite (warm solution).

And what you come across other devices to facilitate work and improve the quality of masonry - write in the comments.

***

Photo taken from public sources, with Yandex service. Pictures

Subscribe per channel, introducing it in the browser bookmarks. There is a lot of interesting information.