Useful content

The ancient building techniques. Traces of drilling and sawing in hard rock stone

click fraud protection

Article Underground floors of old buildings. I do not think so built It caused a great resonance among readers. Subject mysteries of history and construction technologies of interest to many, there is something to smash his head.

I want to show a few facts on the least interesting topic - robust processing of rock by drilling and sawing at a time when technology is supposedly did not know how to do. This topic was raised at the time many well-known researcher Andrew Sklyarov. And better after that no one else did.

The most striking examples of the following high-tech processing of granite are present in Egypt:

Such traces in Egypt a lot. But no one of the guides you will not, that would not appear too many questions.

According to the latest concepts of historians, in those days it did everything tubular copper drill:

Granite - a very hard rock.
Granite - a very hard rock.
Granite - a very hard rock.

This granite processing primitive tool says that probably all did so. Long and hard. But granite is not abrade copper and abrasive under the tube. It wears away, of course, and copper, spent abrasive and time of the master, which according to the ideas of historians are not appreciated.

instagram viewer

But there are strange tracks that do may not be tubular drill:

In addition to drilling tracks, much more in Egypt traces of sawing granite:

These and other examples are well illustrated in the film A. Sklyarov. Who seen - should reconsider, renew in memory. Sometimes differently start to perceive many of the facts.

Also among the examples of sawing stone rocks there are traces of circular saws large diameter:

Next the saw blade with a diameter of 1.5 m in Turkey. This level of modern stationary stone processing machines. And as it did back then?

Granite drilled and sawed - there is a feeling. Or from the masters it was a very long time, or they are able to do it quickly. Propylene quickly time can only be with a tool with a high frequency rotating or moving the cutting part. Then our story different?

These V-shaped marks can not leave the tubular copper drill! It grinds in contact with the stone, and this pointed recess will not work. In addition, tests were carried out on mikrovkrapleniya on the walls of such traces. Copper were found in them! Then how is it done?

Processing stone ancient masters did not only on the walls of construction sites:

Exhibits of the Cairo Museum.
Exhibits of the Cairo Museum.
Exhibits of the Cairo Museum.

The ancient masters were able to make such and stone products. On the project Antropogenez.ru skaulptor O.Vdovina manufactured the like is half a year. It managed to do it at the second attempt and then only in marble. That's what she got:

To the ideal away. Probably it can be done in granite. Only question: why did the ancient, wasting your time? Or they did it faster?

How do these products, where the vessel walls have a thickness of a few millimeters:

One slightest inaccurate motion master and months and even years of work - is wasted. Time is not valued? Made slaves?

High-tech is not only the artifacts in Egypt:

Unfinished vase made of quartzite in the National Museum of Anthropology in Mexico. Drilled core drills. But even at this stage of the processing of one of the most solid stone materials rune will take years of work.

We move to another place in Norway.

Least of all that's understandable these holes in granite, found near the town of Volda in Norway. During the construction of car parks were turned excavating stones. Workers discovered them, these odd-shaped holes. A strange place of discovery, Norway. There never met traces of high-tech stone processing. And it is clear that the drill tube is not done.

It is theoretically possible to make a drilling installation with multispindle head:

But this snap - the level of the modern high-tech equipment. My only alternative hypothesis: when the stones were in the plastic state - someone stuck in a rock shaped pole. Let's say, from a tree. Wood rot, hole left. It's like King Arthur's sword in the stone, the sword stuck, rock solidified.

And this is not the only place with the likes of holes:

Maybe it's all concrete technology? Or outputs of natural cold flyuidolitov from the depths into which stuck something figure (with subsequent curing)? But granite is not like them ...

***

Photos taken from public sources, with Yandex service. Pictures

Subscribe per channel, introducing it in the browser bookmarks. There is a lot of interesting information.

An amazing way to remove water-based paint from linoleum with kerosene

An amazing way to remove water-based paint from linoleum with kerosene

Hello! I want to share just an amazing method of removing dried water-based paint from the surfac...

Read More

What is a mezuzah in a Jewish home for and why it is believed that it protects those living in it

What is a mezuzah in a Jewish home for and why it is believed that it protects those living in it

In Israel, in all houses, apartments, institutions, you can see an unusual rectangular object on ...

Read More

Which strawberry leaves I must cut off, and which

Which strawberry leaves I must cut off, and which

Enviable harvest: trying to achieve the same!Flaming fireworks, fellow strawberry growers!Want to...

Read More

Instagram story viewer