Electric ceramic heaters for 500 rubles with his own hands

Ahead of the heating season for private homes. Sales are gaining more and more popularity ceramic wall heaters. Especially for heating frame houses-thermoses.

Nowadays, more and more becomes an optimum heating by electricity with minimal investment in equipment (boilers, tube radiators) as payback of all this because of the cost of pellets, coal, gas, more and more increasing.

Plus, these heaters can see that they look not only as an electric heater, but also as a decorative element under the window. Color you can choose the most suitable for the interior.

In the frame house at his friends' ceramic heaters generally are built into the walls under the windows. I do not know how to address the issue of fire safety. But this solution is seen.

Prices of ceramic heaters of the built-in electronic thermostat is not so comfortable. For the purchase of heaters for a few rooms need a substantial sum.

But there is a solution of a series of DIY (do it yourself). It is easy to manufacture such ceramic heaters, spent for each order 500 rubles. Watch the video:

The idea of ​​such a heater assembly taken on the channel Mikhalych in youtube. But there shooting quality is poor.

Take a sheet of granite desired area with the necessary colors and metal Z-shaped corners. Two dowels for mounting on the wall and one - as a backup for the vertical position of the heater. Glue (fix) in their liquid nails.

Measure out two bundles of cable 5 m. This will give us the approximate capacity of a heater 350 W. Fix an advance purchase of the necessary resistance heating cable (66 Ohm) On the masking tape. Cable advantageous to buy on aliekspress (link in the description to the video). Fix the cable too liquid nails. How to dry - remove the masking tape. Connecting the ends of the cable and connect to an external electrical cables. Making a parallel connection of these two segments of 5 to 220 m. We check on heating.

Wiring diagram. Only in this case there will be two such parallel-connected cable

Peskotsementnoy mixture is poured (or tiled glue). You can even cover the primer solution that would not crumble.

By the way, we can further reduce the cost of the heater, if the cast concrete part is completely their own - into a decorative shape. First, the front part and then fill in the cable. But it is necessary to use high-quality concrete with fiberglass and paints.

You can put the thermostat. But it will increase the cost of the heater at times. And it is possible to make TCA is made the inventor of this simple design - connect heaters through simple circuit derating:

If someone made such heaters and installed in his house and write their own reviews. Do enough of 300-600 watts of power at room 9-12 m2 per frame house?

Photo taken from public sources, with Yandex service. Pictures

Subscribe per channel, introducing it in the browser bookmarks. There is a lot of information.