The final form of the fence blocks "Washed Concrete" and metalloshtaketnika

Metalloshtaketnik finished mount. It took this week: did some weekends and evenings, and the last has a headlamp flashlight. By the way, it is convenient, can be seen almost everything as day: the screws and the provisions of the "bubble" levels.

I had to tie here in these places finishing accessories fence on the inside section. But in order to keep the distance between metalloshtaketnikom that would spans of it looked harmoniously, we had to cut it along the fence.

Cutting grinder sheets - the process of assembling the fence familiar from profiled sheet. That would end not rusted, painted it with paint, primer-enamel on rust. Remained from painting rungs.

Cut, painted and screwed in the right places

The final form the inner side portion after mounting the latter "strokes"

Next - painting a concrete tape under the fence, what would its light gray color does not stand out. I spread the varnish on stone (for epoxy resin) with 646 solvent (0.75 l varnish plus 300 ml of solvent). That he was in the mire, and penetrates well into the pores of the concrete. Added 100 g of brown pigment, which remained on the pouring plates permanent formwork house foundation.

Start painting. It would not hurt the grass - held her piece of plywood

I finished painting the outside of the foundation. Weather was overcast and the photos turned out not as bright.

The final form of the fence from the outside. Inner painted already with a flashlight. But did not have the polish. Need another bank, were not colored, 4 span.

***

Previous part: Exclusive fence blocks "Washed concrete" and metalloshtaketnika powder painted with his own hands

Subscribe per channel, introducing it in the browser bookmarks. There is a lot of information.