How to replace the handset in the shower hose to the more durable

Again, back to the topic of repair shower hose, I wrote how it can be repaired in five minutes, you are interested leave a link at the bottom.

Cause

When you drip shower hose, In this blame the inner tubeShe usually low qualityEspecially in hoses reaching complete with mixer. Therefore, quickly loses its elasticity and becomes rough and brittle.

Decision

it can be replace the new transparent tube suitable diameter (my 8 mm) size and then the problem will be solved. I just yesterday there was such a case, and I decided to share with you my experience of replacement.

It's all standard, unscrew the shower hose and gently prying with a knife remove the nozzle from both sides.

Next, measure the hose we needed length, cut and loaded into the hose remains inserted into the pipe fitting and set them in their place.

Surprisingly, this procedure occurs quickly and easily without additional movements.

inspection

The first step is screwed hose to the mixer turned on, everything is fine, and already then screwed watering and everything is fine, too. All the work took some 15 - 20 minutes.

On the tube

As it turned out, these transparent tubes are silicone and PVC, The latter being inferior to the characteristics of silicone.

Since his pipe for gidrourovnya I bought a long time, some of which she was known. The only thing that I did, it filled the interval of 10 cm of boiling water for testing, the result was satisfied.

Now many people think, why so tormented, went out and bought a new pipe, but the people, we only buy and know how? A hands? And tired of buying these hoses.

Can buy hose is made of PVC and the problem will disappear rushBut there are weaknesses nuts and they fall apart over time, but maybe it's just my luck. And so, as always, the choice is yours.

video description

Subscribe and share with friends on social networks, maybe it is useful.

On this topic: Flowing shower hose - Repair in 5 minutes