How to install on interior doors Finishing panels. My way

Finishing panels there are several types, but today we will see how I installed with laminated MDF transoms end on the door frame.

At the groove box is inserted flush transoms and notes (in fact) on the wall, then even if the wall is littered with transoms will look aesthetically pleasing, and the flaws of the walls will not be noticeable.

Then, transfer the mirror to size and transoms Scrollsaw. Width my transoms allow from one strip to saw just two vertical.

Here nasverlil in the cut end of the hole to avoid splits, I set them decorative nails for casings, and bit off a side cutter at an angle. This was done to transoms not moved away from the groove and did not form a gap.

Prop master or wedges placed on the box at a certain distance hangers for drywall, but I decided at that moment to do so, it turned out well.

After twenty centimeters short steps, without fanaticism zapenil and transoms have risen.

So looks ready door transoms, as we can see, you can tell in a few words, but the process is long and laborious.

video description

Subscribe and share with friends on social networks, and we have not time yet continue to "door" and touch on other topics repair. Your home renovation.