Useful content

Fence of the decorative blocks, and metalloshtaketnika. The results of the work in the middle of July 2019

click fraud protection

Building a fence is slowly but progressing. Due to the independent production units around this pace of work and counted. Long, but beautiful and exclusive. Moreover, at a cost comparable to conventional PGS-blocks.

So, what has been done in the last week? I reached the point where the beam must be mounted from the metal pipe to metalloshtaketnika. I bought them at the end of June. I decided to paint them immediately:

Process of degreasing solvent 646
Process of degreasing solvent 646

At the beginning of degrease - rubbed oil factory and a local rust.

Steel pipes shiny, without local corroded areas. Three tubes remained with 2017. - grinder scraped from the wire nozzle with their thick rust and they have good as new.

Veils primer enamel in 1 to 3 rust TM Lakra banking 1.7 kg chocolate brown color.

In 2017 acquired for coating pipes priming enamel TM Sayver.

Lakra seemed to apply much better - high hiding power, it is not necessary to pass several times a brush. This is not surprising, the price is above the banks. Moreover, Lakra - the average price segment. After drying appeared glossy appearance. At TM Sayver this gloss there.
instagram viewer

So, in the opinion of the expert lacquers, although these brands do not have a relationship.

Pipes transferred to dry on the foundation
Pipes transferred to dry on the foundation

On the coloring it took almost half of the day. It was a sunny hot weather - the pipe dry for a few hours to the extent that you can take them with his hands.

The fence has decided not to make mortgages and then fasten them to the bar, and immediately fix these prozhiliny.

Fixed direct hangers for mounting of steel structures for drywall screws for metal 4,2h13mm. Inside the pillars composing the pipe still are locked concrete.

Decorative covers on the blocks yet - they will be installed after the pole before installation metalloshtaketnika.

Mounting could not even do that. But so peaceful. It ensures that no intruders are not squeeze the tube with metalloshtaketnikom of the pillars.

Result on 07/14/2019
Result on 07/14/2019

A disk grinder stone sawed grooves in blocks of pipe and simply put these blocks on pillars - without solution. Later I will set both horizontally and vertically, and the inside seams zamazhu zalyu concrete.

As filling continues to blocks composing pillars. It remains to produce 15 blocks. Finals closely.

Read more: Low reliability vibration pumps for water. Tips producers

Subscribe per channel, introducing it in the browser bookmarks. There is a lot of useful information and interesting articles.

Are the pear leaves starting to turn black and dry? I tell you what urgently needs to be done to save the Harvest

This fruit occupies an important place in my garden and I am used to taking care of pears carefu...

Read More

Bright renovation in our new apartment - everything was done by professionals. Coming soon

Bright renovation in our new apartment - everything was done by professionals. Coming soon

Buying a new apartment is a real holiday for a family. Only after that you need to do a good repa...

Read More

The story of an unusual pond or how I made a pit for frogs Part 2

The story of an unusual pond or how I made a pit for frogs Part 2

Just like not all yoghurts are equally useful, not every area is suitable for creating a pond. In...

Read More

Instagram story viewer