Remove the old paint from the walls will quickly head to drill their own hands

When we ordered a bath and toilet repairs to Khrushchev, the workers are faced with a difficult problem. Removing stubborn old paint on concrete walls - is not easy.

Previously, it was commonplace to paint wall paint carnival not only in the bathroom and toilet, but also in the kitchen. In the kitchen, we were doing repairs themselves and did not remove the paint, and simply cleared of dust and pasted washable wallpaper. Wallpapers held so far (passed 4 years).

See, it does not easily pass from us repair in the bathroom and toilet.

You can remove the paint with an ax, trowel. But the process could drag on for a long time. As a result of a headache from the noise, not only from the owners, those who are doing repairs, but also its neighbors.

How to speed up the process and clean the wall paint faster? There is a good way to do it.

Attachment for drills

There are many tips for sale - various metal brush wheels. But all of them for a long time cleaned the walls. And most importantly, turn the paint dust, which is distributed throughout the apartment. Do not waste your money in vain for such attachment.

Instead, you can use a drill hammer drill driver mode.

Nozzle - circuit on the web today is considered the most effective for removing old paint. It is easy to put in place in the drill bit. This circuit 3, which are attached to the central axis by 120 degrees from each other. Now the dust at work and will not quickly get to remove the paint from the walls.

At work necessary to wear glasses. It is convenient to work with the left hand and right, since many instruments have torsion in opposite directions.

Attention! When the long chain links can fly off in the opposite direction or to the floor. It is important to consider. During operation, not much smell of burning. This will burn the nozzle units, rather than the instrument itself. Therefore, take a break during operation.

Make packing your own hands

It is possible and to make such a nozzle. It will take the M10 bolt. Still needed nut 3 1-3 5-7 chain links.

The chain has a surface with paint. After such processing can go on again spatula for final cleaning paint from walls.

channel RemontDom - https://zen.yandex.ru/remontsthanks for watching. Place Like - thank you!