Other products, molded me for "Washed concrete" technology

Let me remind you that this technology of the decorative surface with natural pebbles I filled permanent formwork for the foundation:

Reinforced slab: polystyrene layer and the layer of decorative concrete with brown pigment with scoured neskhvativsheysya surface bared stones.

Fence blocks shown in the previous article. But this is not all the products that have tried to produce for its construction. By the way, where is manufactured, molded product - I wrote here.

Acquired forms a pair of ground gutters: Drain yard small 81/1, size: 26.0 x 16.0 cm, thickness 8cm - 120r. We get this such products:

I once wrote in an article that the paint for metal pillars although it was the effect of the powder coating (priming enamel on rust 3 in 1), but I came across a poor quality. Although gray 3 to 1, on the opposite side of the fence holds good:

Need to repaint or poles, or think of something else. I have decided to close their decorative concrete overlays:

Molds for pavers. An internal cavity made from a piece of wood wrapped with stretch film.

The result is not pleased. Looking for other forms and something different for the formation of cavities. May do more massive elements. The idea is there, but you need to experiment.

When the remained excess concrete - filled the tile:

I bathed in these forms:

At the bottom of stacked packing paper, cut into a size of 30x30 cm and pre-impregnated concrete setting retarder. That way the bag with him:

Name and address of the manufacturer's website is visible. Purchase, use of technology, who liked the surface under gravel and one in the region have a career with the CBC with pebbles. Skalnik of crushed product looks is not so, not as "warm", I would say to the eye. Although, too nice and concrete get stronger. Only more convenient to wash a car wash.

In the fall of 2018. It acquired more molds for a fence blocks. Under block size 388x200x188 mm (GOST):

Acquired from the manufacturer in Kirov delivered through TC. Not only that, for years run a stable transport company went bankrupt (the manufacturer had to take back the goods and send another TC - 2 months on the road), and forms did not like me because of the fact that the plastic bends, has no edges rigidity. They require a framework. The manufacturer also sells frames, but is silent about such a problem with the forms.

In general, the savings do not always lead to cost savings. You could buy a little less for the price amount here in the city. And the shape better.

Maybe for foam or polystyrene and are suitable, but for heavy concrete - need more robust form. Frameworks will produce this season.

Read more: Plot Layout and final costs for the foundation

***

Subscribe per channel, introducing it in the browser bookmarks. There is a lot of useful information and interesting stories.