Errors when working with screwdriver, which allow even the most experienced. Tricks at work

Screwdriver is in every house. It was absolutely necessary for screwdriving, screws. Now everything has changed, replaced the screwdriver appeared useful tool.

Screwdriver - a true helper for home and garden. With him the work is much faster, more conveniently and efficiently. On a single charge battery tool can tighten 90 screws.

Now mostly use tools on the battery. Lithium - ion batteries have a higher capacity and longer life.

In Leroy recently bought the most budget screwdriver. Since then, he is not just. Screwdriver with a great feature - backlight. He also makes a sound when you work (but it too in my opinion). See details about ScrewdriverAnd how much it cost.

Even such a customary and familiar to all tool like a screwdriver, it may surprise. Let's talk about the tricks when working with tools and mistake that even experienced craftsmen.

Tricks to work with screwdriver

If you need to drill a hole of small diameter, it can be a problem - Drill poorly kept. It will help cut the rod from the handle. It needs to be put on a drill, and then it will be held firmly in the holder. If there is no bar, then wrap the foil tape or duct tape.

Screwdriver will interfere with the grout. Only if there are specials. nozzle. look about tips on the screwdriver.

Dust and sawdust when drilling will help plastic bottle (the cut part of the neck).

hold steady

Some shake when using screwdriver to facilitate the work when drilling a solid foundation. It does not help, in fact, change the angle of the hole makes more and sloppy.

As a result, hardware keeps badly and drill can be broken. After each operation, disconnect the battery, remove the nozzle and wipe the dust from the instrument.

faithful mode

There are some screwdrivers that can work with 2 modes: drill holes and screw the mount. Many people do not switch modes, think that the tool is nothing wrong will not happen. But drilling mode, a higher speed.

And if the drilling operation to tighten the screws, the drill can "lick" slots. Moreover, at high speed (drilling mode) and during tightening the screws, screwdriver may fly from the hands. Change the mode when the instrument is turned off!

Working hours

Screwdriver has a limit on the duration of continuous operation. Some do not pay attention to it. As a result, the tool overheats and breaks down faster.

Channel RemontDom: SUBSCRIPTION. We wish you a good day and ask Like - thank you!