Useful content

Why insulate the house better fibrolitovye plates - plus, the installation, the cost of the plates

click fraud protection

Building material - fiber mat composed of wood chips (60%), portland cement (39%), sulfur and alumina waterglass. By connecting these components, the pressing and drying the obtained solid, watertight and lightweight material.

Photo: paneldomstroy.ru/wp-content/uploads/2016/05/sip-paneli-greenboard_3.jpg
Photo: paneldomstroy.ru/wp-content/uploads/2016/05/sip-paneli-greenboard_3.jpg

Fibrolitovye standard size plates. The width of 600 to 1200 mm. Plate length - 2400, 3000 mm. The thickness of plates 30 to 150 mm. Plates 3 can meet various grades: insulating (F300), acoustic (F500) and the heat insulating-structural (F400).

pros material

Durability (over 60 years), moisture resistance, fire safety, environmental friendliness, good heat and sound insulator, biostability, frost.

Photo: ogneportal.ru/wp-content/uploads/2016/10/ustr_FD_16.jpg
Photo: ogneportal.ru/wp-content/uploads/2016/10/ustr_FD_16.jpg

FB material is not subject to burning. With plates simple and easy to operate. Their well-drilling, hammer nails, fasten anchors. Excellent adhesion to the plaster due to the rough surface. Not damaged by rodents is not formed fungus and mold. Plates do not dry out and crack.

instagram viewer
FB is used for interior partitions, as a permanent shuttering, thermal insulation of the floor, roof, walls as trim for finishing and others.

Floor

Insulated concrete floor above unheated rooms in the attic. Placed directly on the base plate, and the gap between them promazyvayut cement. Top make screed thickness of 3 cm. After the screed is flooring.

Walls

Insulated mainly inside. Some insulated facade. Sheets secured to the walls dowels - fungi. Then comes the plaster. If the plaster on the outside of the building, then use water-resistant solution. Then comes the finishing.

roof house

Image: greenboard-system.ru/templates/greenboard/img/folder1/kryshi_iz_GB_1.jpg
Image: greenboard-system.ru/templates/greenboard/img/folder1/kryshi_iz_GB_1.jpg

Thermal insulation is carried inside and outside. Cut plate (thickness 10 mm) using a saw and sheathe lining. Fixing with screws. Next is otlelka fiberboard or the like. material.

Fixed timbering

On the uprights fixed FB plate and the space between them is filled with a solution. After solidification of the plates are not cleaned. They serve as a heater.

Photo: recn.ru/images/recn/2016/09/fibrolit-v-stroitelstve-fundamenta-1.jpg
Photo: recn.ru/images/recn/2016/09/fibrolit-v-stroitelstve-fundamenta-1.jpg

Mounting plates

Produced using screws or wood screws (if a wooden support). If the brick wall, the special suit. screws "umbrella". If the concrete base, the dowels. FB plate is secured yet and mounting adhesive.

The house, which is built using plates FB will be warm and will not hear the sounds from the street. Plate size 3000h600h25 mm worth 590 rubles apiece.

Channel RemontDom: SUBSCRIPTION. Put huskies - thank you for your attention and see you soon!
Pie of the walls of a frame house using Finnish technology (errors lead to freezing of the walls, rotting of the tree)

Pie of the walls of a frame house using Finnish technology (errors lead to freezing of the walls, rotting of the tree)

Frame houses using Scandinavian, Finnish technology are very popular in Russia. Scandinavian home...

Read More

2 weeks - and spring in October

2 weeks - and spring in October

Already something that you can eat! Here are my leaders 2 weeks after sowing: A vegetable garden ...

Read More

Karkasnik, insulated with straw and original façade, slate

Karkasnik, insulated with straw and original façade, slate

Straw bales as a filling for wood frame - natural insulation for energy-efficient homesFrame hous...

Read More

Instagram story viewer