Bath samostroyschika. Mounting furnace chimney effect

Once I mounted the subfloor - brought the window. He installed himself. Level, pegs, clamps and foam. The size of the small windows and custom. Opening a window in the room had to be done in the thickness of one bar higher and wider.

After that, he spreads a floorboard and covered it with three layers of varnish PF and Yachting varnish. Acquired economy class and later also regretted. No need to save money on such materials. And not satisfied with the fact that the varnish had a strong residual odor even after months or even years. After a few days the room is closed, not aired - smell alkyds.

Further I decided to start laying the tiles in the steam room and washing. There remained a certain amount of porcelain, which decided not to use in the repair of the apartment. It turned out not enough just a few tiles that have managed to find on sale.

Laying porcelain tiles held in October. For this purpose, I took some time off. It took a couple of days.

Already in the beginning of October I bought bannuyu furnace and chimneys Sandwich. Chimney over the stove - a height of 1m stainless steel. Because Sandwich burned in this place.

Angara oven 18L Vitra company Termofor. Oven factory chose the descriptions and reviews on the internet. With a glass door to the fire effect. For the volume of my doubles (about 9m3) Its lack of power with a large margin. Then, it turned out that a sufficiently high-quality wood Bookmarks that would bring the temperature in the steam room with daylight saving time to + 80g. per 30-40 minutes.

List acquired for the furnace installation:

- Flue included: pipe module 1mbv = 115 mm - 1 pc.;

- Plug the sandwich bottom, stainless steel - 1 pc.;

- Sandwich f115 / 200 stainless steel / mirror positions. - 2 pcs.;

- Sandwich f115 / 200 stainless steel / galvanized - 1 pc;

- Straight glass 50mm, l = 200, f200, galv. - 1 PC.;

- Flange 500 * 500 - 1 pcs.; upper cap - 1 piece;

- Deflector with flexi hose - 1 pc.;

- TM Krass silicate sealant for fireplaces and stoves -1 piece.

- Basalt insulation and trim sheet of glass

It was necessary to add to the valve design for the chimney that would be after the oven to heat, do not go through the heat pipe. In autumn and winter it is very important. And now from the room very quickly blown heat, especially in windy weather.

Consider this item. As well as a heat exchanger for water. It is not necessary to arrange the construction of a samovar in the most steamy - increased humidity and the effect will be dry sauna. Water tank should be placed in the wash. I design the furnace heat exchanger assembly is provided, through which through corrugated stainless steel pipe circulating water itself when fired stove. In winter, in the tank during the time while the furnace is heated, the water is heated to boiling.

The installed himself in one day.

Council:

Particular attention should be paid to the passage of the chimney through the ceiling and roof. Drank in the ceiling square hole of sufficient size to impose a sheet of glass, and put into basalt insulation. On sale now sold ready-through units for such options.

Screwed bottom reflector closing the hole. At the top, in the metal tile grinder cut marked up in the attic under the terms of the chimney. The edges are bent to the outside, unnecessary cut. And sealing the gap between the chimney and the roof with silicone sealant. A rubber seal is not acquired until now, need to somehow do it. They are not as expensive in price.

He remembered one detail. After installation of the furnace and the flue brought further 8 bags ekovaty and sleep overlap over washing and steam, as I leave it blank for the convenience of the chimney installation.

On strobaze acquired red brick facing - 107sht. Enough for what would impose the oven on both sides. Here's what happened:

Photos 2017. Because previous pictures do not do it. There is already laid tile in front of the stove and the chimney over the stove overlaid large pebbles in the net, rolled into a roll. As shown the heat exchanger tube extending to tank in the washing water, which set the next season, in 2012.

Brick gested for the finished high-temperature mixture Hercules TM. kneading in a bucket.

Masonry was not very. With brick I worked the first time. Then he decided that the part of the room will obkladyvat brick artificial stone or pebbles in the form of a mosaic. The second option is only carried out in 2018. Subsequent articles will show what happened.

Final costs in 2011 .:

On the little things, but the amount has accumulated to the value of the bath is already decent. And if it all did the brigade, the amount would have been at least a third more.

***

Read more: The third construction season. I finish building the bath

Subscribe per channel, introducing it in the browser bookmarks. There is a lot of information.