Pavement tile: how to make your own hands

Paving tiles can easily be made with your own hands. First of all you will need for this form of dispensing the solution and the solution itself, rubber gloves, bucket, rake, basin, flat table to fill.

Production of paving slabs with their own hands the process is quite time consuming and if you want to quickly and accurately cover large areas, it is better to buy ready-made. If you want to make a small track, if you love to learn new things and to do everything with your hands, and you absolutely nowhere rush the production of tiles - this occupation is not only please you, but will use their creativity ability. By learning the produce and put small portions, we can move on and move on to more space.

Paving tile and shape for its manufacturing

The first thing to forms in which the tiles will be bottled. Here are the options. The easiest - is to buy a ready-made from high quality plastic. These forms cost about $ 1. You can also do it yourself mold. The easiest option - to pick up a plastic container of any product. They now sell and fruits, and frozen foods and confectionery.

A more complex, but it is much more durable and comfortable option - is to make shapes out of wood.

Composition of the solution from which the manufactured pavement tile

There is enormous scope for experiment lovers. Variants for the preparation of a plurality of rings solution. Let's start with the cement. Many recommend taking his brand M400, but experienced builders have warned that the current production of cement does not always occur to the appropriate standards. Therefore, for the first attempts at writing, I would not save the brand and would take 500 cement. Not very nice to be in a couple of months to see the tiles crumble.

It can take and finely sifted and stones - this tile will look prettier and texture, although the fortress of tiles is not affected. Water is added to the solution only fresh drinking. Old, stagnant water can not be used - it will negatively affect on the tile. To prepare the solution mixed cement and sand in the 1: 4. This amount will be added to a water measure. It is added to the dry ingredients while mixing them. Should get a dough-like consistency - the solution should not slip with a trowel.

To Pavement was colored, the dye is added to the solution and the plasticizer. The plasticizer is about 0.5% of the total dry components of the solution. It is added to the solution he had already divorced. Breeding must be in hot water until complete dissolution. The pigment dye is approximately 2% of the amount of dry mixture.

Save it should not be, if you want to get really bright and beautiful tile. The amount of water plays an important role, how hard does not interfere with the solution, adding an extra should not be. Excess liquid at 30% leads to a loss of strength of concrete twice. To improve the quality measure sand 1 can be replaced by 1 granite measure dropout or dust-gran.

Formation of paving slabs

Molds before filling must be lubricated. This can be done with special grease for high-quality stripping products or cooked own mixture. To do this, 50g of engine oil to intervene in 1.5 liters of water. The mixture should be long and carefully stir. Too oily lubricant will ruin the tile, if the fat is not to be missed - that there are problems with dismantling.

Forms are filled with a mixture of pressure from the center to the edges

If you shake the mold, then the solution is evenly distributed inside and excess air out of him. In industrial production at this stage using vibration tables. Dried tiles on the street, it should not be exposed to rain and sunlight.

After one day, it is already possible to remove the tiles from the molds and leave them for another week for final drying.

A little practice and experimentation, you will be able to produce tile better and better quality. Believe me - your efforts were not in vain!

Thank you for reading this article!

your Like(+ Or -) and comments (positive or not) is very valuable to us! Thanks to you, we realize that we are moving in the right direction.