Convenient screwdriver for problem areas

Friends, I'm sure you know very well what it means to tighten the screw or screw in which a-inaccessible place switchboard for example, where the two arms are not included, or there is a risk to miss where you are not precious fasteners. For such cases, offer highly specialized home-made on the basis of a long screwdriver.

First you will need to bend bracket from a solid metal strip. Both are bent on edge 3 cm but it does not matter. The edges of the cuts are madeOn the one hand screwdriver, the other a screw, bolt or nail! 1.5 cm Depth of cuts. The length of the bracket corresponds to the length of the screwdriver by the handle itself.

Next you need to be equipped with a screwdriver spring. You can either not very long, it is placed on the screwdriver. One edge of the spring rests against the handle, something other than fixed. I put a piece of dowel and pulled at him the puck. Washer also stands on the other side of the spring.

Now I gather home-made. Slightly

sprung a screwdriver abuts the bent portion. It remains to try it. To do this, I delay a little screwdriver and insert the screw into the cut. Let go of the screwdriver and it is now firmly screw presses, which can start in any hole.

Tightening the screw a little bit loosen brace on his hat, pressing the spring-and-shoot device. Self-wound in the right place and locked, then I dokruchivayu ordinary screwdriver.

When loosening the screw in the final stage, it has not fallen, put on home-made, wriggle through and calmly rented. It seems to be shown everything. Evaluate.

Hesitate evaluate material andsign upCanal.

ANDit is interesting:

The most-easiest to handle households. the door for 5 minutes

Why again mold on the joints? Agonizing replacing sealant

A simple repair burned-out LED-lamps. Still serve!