Useful content

Pouring the concrete cover of the septic tank. What formwork can withstand such a load?

click fraud protection

The reliability of any formwork matters, especially if the concrete is to be poured "in the air".

The concrete box is ready and coated with waterproofing. Now it's time to cover all this with a lid, of course also concrete.

And here you can't make mistakes... I donโ€™t want to somehow in a few years, walking around the yard, fall into a container with sewage, albeit with our own ๐Ÿ˜‚.

Although nothing supernatural needs to be done.

Of course, the option with some kind of factory concrete structure is more reliable, but no self-respecting self-builder will allow himself this... ๐Ÿ˜Ž

So we do everything according to the standard:

  • The basis of the steel was boards 100 by 25 mm, which were supported from below with the same supports.
  • OSB was laid on top of this lattice. After pouring the concrete, it will remain there, and I will remove the supports.
The holes for access to the compartments were made with a drill and a regular hacksaw.

The next step was to equip passages to the septic tank compartments.

This work required a special approach. Everything is described in detail in this article.
instagram viewer
The slab sides were made of the same OSB and sprinkled with sand. With a wall height of 120-150 mm, more is not needed.

Only then, the film was laid, and the reinforcement went.

All metal remains were used for reinforcement. The rods are 10 mm, and the mesh size is about 250 by 250 mm.

I placed it on stands with a height of 45 mm, which were left from the foundation for the house, and everything cannot end.

Given that the dimensions, so to speak, spans 1.8 by 2.3 m, then such a reinforcement and a layer of concrete of 120 mm will be sufficient. The whiter is that cars will not drive from above, and you only need to keep your weight and soil ...

The concrete was poured successfully.

โœ… Here, we can say that concrete is poured in the air, and several supports hold it from below. But in fact, everything turned out to be much easier than with the filling of the walls.

Multiple supports did not help there, and concrete leaks had to be urgently eliminated. How I was having fun read in this article.

Subscribe to the channel.

Come to my Youtube.

Like ๐Ÿ‘, and wait for the continuation.

Quick-joiner yews. One of the manufacturing options.

Quick-joiner yews. One of the manufacturing options.

IN a recent publication I wrote about the simple joinery tisah which is easy to do with their han...

Read More

How to grooves with a homemade filler router

How to grooves with a homemade filler router

On the Structure of the device can be viewed hereAs well as used for assembly dowels here.Next, I...

Read More

Acrylic or quartz - which worktop for the kitchen will suit you?

Acrylic or quartz - which worktop for the kitchen will suit you?

If you are determined to enter into the design of the kitchen countertop stone, look at the synth...

Read More

Instagram story viewer