Construction gazebos with their hands

If you decide to build a pergola in the suburban area of ​​its own, it is possible, in this article you will find practical advice that will help you with this.

Build a gazebo with your hands is not difficult. For this we need a little bit of free time and a great desire.

All materials for the construction of the gazebo can be purchased on the economic market or hardware store.

Before building, you must first decide what material will be a gazebo. If you need a durable gazebo, which will last more than one year, it is recommended to build a gazebo with the foundation. The use of stone and concrete will give the desired result. If you want to put the gazebo, suppose just for the summer, you'll like metal or plastic garden furniture, as it can be foldable and portable.

We dwell on the gazebo with a foundation with classic wood paneling. It fits in any landscape design and will be an excellent element of decorative design suburban area.

The most comfortable and durable will be reinforced monolithic foundation.

At first, doing the layout under the gazebo. Further deepening digging depth of 15-20 centimeters. For the foundation will need sand and gravel. All fall asleep one by one in 5-7 cm thick. and dub. Top placing rebar or steel mesh. Then fill all the cement-sand mortar, well compacted and leveled. Leave about 20 - 28 days to become stronger foundation.

After the foundation is ready, it is possible to start manufacturing the carcass. This will require the boards of section 100 * 100 mm. We place them in the corners of the gazebo. We make an incision on the risks and remove the excess with a chisel. Also put on the floor a few bars by the board to the end of the construction of the floor does not bend under the weight of people. All screws twisted and cut off the excess. The lower part of the arbor is ready.

, Proceed to the main frame. His collecting of timber section 40 * 100. All pre-treated wood milling machine. Racks of equal length are screwed to the lower corners of the metal frame. It should be controlled to remain stand upright. For the strength of the entire frame perimeter screws fastened further crossbeam. If the design a little bit loose, do not let that bother - to fix it after the final plating.

Next we do the top frame to the roof and put the shingles. All arbor sheathe tree. That's all! Garden furniture is ready!