Three types of rotary cutters from China. How to deal with a tree.
I purchased these burrs on Aliexpress before the New Year. I took several types for woodwork. They left a good impression, and what kind of cutters they are and how they work, see below.
First set - tungsten carbide cutters. Includes 10 pcs of various shapes. Took here.
Convenient box for cutters. All cutters are even, I did not observe beats.
All cutters were tested on oak and pine, revolutions of about 4000 rpm.
They do well with both oak and pine. Efforts are made small.
The second set - as they wrote on Aliexpress: "End mill tool set for CNC milling engraving cutter." So understand as you want.
Also a handy storage box.
Quite aggressively they cut into the material, it can be difficult to hold without support. I took these cutters here.
Third set - a set of cutters from a quick cutter 20 pcs. I took to try and practice sharpening. Bought here.
The cutters came in a plastic bag, in bulk. It turned out to work surprisingly well "straight out of the bag".
Of course, the efforts during work must be made a little more than with tungsten carbide.
You can see how the cutters work in the video.
Results. In general, all three sets turned out to be quite working tools. I hope to show you their work on a specific product soon.
Thanks for reading. I would be glad to have your support in the form of a like and a subscription to the channel. And see other publications on the channel.
Alexander.
P.S. I also invite you to your site.