Rotary hammer DeWALT D25144K pros and cons!
Experience with tools from DeWALT mine is big enough. I like their quality and reliability. In my opinion, DeWALT basically doesn't make bad instruments. But each model, as well as the tools of any other brands, has its pros and cons.
Today we will discuss #perforatorDeWALT D25144K. I will share with you my opinion about this tool, I will tell you what advantages and disadvantages I was able to identify.
Pros of a puncher #DeWALT D25144K
DeWALT D25144K is a 900-watt hammer drill that can handle drills up to diameter 28. The tool is powered by the network. It's comfortable, lightweight and powerful. The noise level is low and vibration is hardly felt. It is important that no grease leaks have been detected.
- The number of revolutions is up to 1450 per minute. The number of beats is up to 5350 per minute. This is the highest parameter in its class. The model is equipped with electronic speed control.
- The hammer drill has 3 modes of operation: impact, drilling with impact, drilling.
- The tool is light enough. Therefore, it is convenient to hold it even in one hand. Rotary hammer weight - 3.1 kg.
- The hammer drill has a very convenient design and good ergonomics.
- The rubberized handle has an anti-vibration effect. It can be easily adjusted and set to the desired position.
- The hammer drill is equipped with an illuminated working area.
- The button for changing the direction of movement is located on both sides of the punch, which is quite convenient in work.
- There is a drill depth stop.
- Manufacturers have removed the drill hold button. It seems to me that this is not very important for working with a puncher, but I will write in the pros, suddenly it will be useful to someone.
- Removable cartridge SDS +. A second drill chuck is included. The cartridges are easy to remove and change quickly. No adapters are needed.
The hammer drill comes with a sturdy shock-resistant case with metal locks and a comfortable handle. The case is equipped with special fasteners that allow you to attach it to other cases from the company DeWALT. It is quite convenient when carrying - in one hand you can easily transfer 2-3 tools at once.
Disadvantages of the DeWALT D25144K puncher
There are not many disadvantages, in my opinion. Rather, these are even just minor flaws that cause some inconvenience in work.
- Small short borax. Due to their small size, it is not always possible to change them quickly.
- I would like the case to be more roomy, so that, in addition to the hammer drill, it can be placed there drills and other parts.
Studying user reviews before buying, I met information about overheating and melting of plastic parts, about strong beating of the cartridge. I didn't have such problems. Therefore, check the tool before buying and beware of counterfeits.
And also on our channela lot of useful and interesting informationfor construction, finishing works, design, landscaping and much more! Therefore, do not forget to subscribe to the channel so as not to lose us!