Top 10 best articles of the Carpenter of the House channel for 2019.

Greetings. I did an analysis of the articles published on the channel last year and singled out the top 10 articles based on the number of reads, likes, and post-read subscriptions.

Meet.

10. How to make a simple bench for a summer residence

I tested this design in different ways - a small bench, a bench for a bath, a long bench to the table.

The bench can be made quickly. If there are suitable boards or board trimmings, then half an hour is enough for making.

Of the tools, a hacksaw and a screwdriver or drill will be enough.

How this bench is made can look here.

9. A few simple tricks for sharpening and setting hand saw teeth.

It became interesting to figure out how to sharpen hacksaws and what different craftsmen teach. I found several sources with simple and understandable materials.

The article contains links to these materials, provides photographs, and describes a simple device to help sharpen.

View article can be here.

8. Overview of homemade tools for the home workshop

This publication contains information about homemade gadgets - the most demanded in my workshop.

View Fashion Software Review this link.

7. Sawing machine from a manual circular. Blueprints.

This was my first homemade machine.

It would seem a simple thing to install a hand-held circular saw in the table, but how many new possibilities it gives.

The article shows a method for attaching a saw to a table, a method for fixing a button, and there is also a link to download drawings with dimensions and design of a parallel stop.

You can get acquainted with the publication here.

6. A circular saw. Easy way to trim edges

The need to trim the edges of the boards is not such a rare task, and in this post I will talk about a fairly simple way to do this.

This method is suitable for tasks where you need to prepare a small number of boards.

And this method allows you to get an even edge, which is enough to stitch once or even grind immediately after the saw.

You can view the article here.

5. A gift made of wood, which my friends really liked and what it led to

This is a story about how small gifts to friends have led to two decent New Year's orders.

Read the article.

4. An easy way to remove nails that are tight

It happens that the nails sit so firmly in the board that their heads only come off when trying to pull out.

How to deal with such nails you can read here.

3. A little trick to make chairs more durable

When making chairs, you can make them more reliable with a little carpentry trick.

What it is - read here.

2. Geometry in carpentry. The old method of making flat boards

This method is more familiar to those who work with metal. In plumbing, this is called the "three plate method".

How it applies to wood look here.

1. Simple homemade product with ample opportunities

Made of plywood with a small washing machine motor.

At the moment, it is used in conjunction with a flexible shaft, and there is also a removable module with sharpening stones.

You can get acquainted with the homemade product in this article.

Thanks for reading. I would be glad to have your support in the form of a like and a subscription to the channel. And see other publications on the channel.

Alexander.

P.S. I also invite you to your site.