Making a bathroom cabinet. Final assembly. Part 10
Greetings.
In the previous parts, it was about drawings, fixtures and methods of work in the manufacture of such a cabinet.
You can view these publications by following the links below.
Making a bathroom cabinet. Project drawings. Part 1
Making a bathroom cabinet. Workshop fixtures. Part 2
Making a bathroom cabinet. Body assembly and assembly tool. Part 3
Making a bathroom cabinet. Making grooves for the back wall and mirror. Part 4
Manufacturing of facades using circular and milling cutters. Part 5
Making decorative items. Part 6
Preparation for painting and unforgotten little things. Part 7
Preparation of decorative elements for facades. Part 8
Making a bathroom cabinet. Part 9
This part will focus on the final assembly.
All the details of the cabinet are fully prepared, it remains only to assemble them.
The assembly sequence is as follows: first, shelves are glued onto the dowels between the racks.
Further, the resulting two sections are also glued to the dowel to the bottom of the cabinet.
Before installing the roof, you need to insert a mirror into the grooves.
I decided to fasten the roof with self-tapping screws to leave it possible to remove it, for example, to replace a mirror.
Next, it remains to fix the bar for the hinge and the rear walls.
In the strip, I pre-made holes for mounting and screwed an additional strip on the roof for greater reliability.
I laid the rear walls in the grooves and fixed them right along the joint with self-tapping screws with a faceplate, having previously made a hole to drown the faceplate.
The cabinet body is assembled, it remains to hang the doors and screw the handles.
I glued the lower bar to the dowels and left its installation for completion.
More details about this work can be seen in the video clip below.
Thanks for reading. I would be glad to have your support in the form of a like and a subscription to the channel. And see other publications on the channel.
Alexander.
P.S. I also invite you to your site.