Is it cold in your house or apartment? We are looking for where the heat goes ...

Each person has a place where he feels safe, can relax and spend time with his family with peace of mind, the place that he can safely call his home. Home improvement always remains a burning issue for every owner.

One of the most important aspects of home improvement in our climatic zone is the preservation of heat in the house during the cold season. A well-established heating system means warmth in the building and well-being of all family members, as well as saving the family budget. Is it possible to check the heating system in order to detect malfunctions and heat leaks? Certainly. Thermal imaging diagnostics will help to assess the quality of thermal protection at home, to find defects in order to fix them later.

Correct conduct of a thermal imaging survey can make it possible to competently, and, most importantly, economically carry out work to eliminate heat losses as much as possible. Such a study promptly provides objective reliable information about the thermal protection of a building that has been built or has been in use for a long time.

To carry out this kind of research, a special device called thermal imager. It is capable of capturing the temperature of objects and, after internal transformations, produce images accessible to the human eye. It is from these pictures that a person can detect problem areas in the house.

It is advisable to conduct research with a thermal imager before purchasing a cottage or apartment. This procedure will help check the quality of the work performed, identify and eliminate problems in time.

Modern building materials make it possible in the shortest possible time to construct lovely buildings that attract buyers with aesthetics. Beautiful new houses are not always built of high-quality materials, and it is not always as warm and comfortable to live there as it seems at first glance. Builders often care about presentability much more than quality, heat retention and energy conservation. A beautiful but cold house in our climate is completely unsuitable for permanent residence.

Inspection of a house that has not yet been finished costs a lot of money, but the funds invested in this procedure fully pay off. In time, even before decorative repairs, by checking the building, you can avoid subsequent rebuilding and alterations in order to eliminate existing initially defects, which are difficult to detect without special equipment until the building is introduced into operation. It is better to take care of the warmth and your own comfort in advance. If you buy a ready-made building, this study will save you from a bad purchase or help to significantly reduce the initial price offered by the developer.

A surprising fact is the low awareness of homeowners about the possibility of conducting thermal imaging research. Conscientious developers, confident that their work was done really well, recommend themselves Potential buyers should conduct a survey with a thermal imager before purchasing to demonstrate their skills. Unscrupulous developers prefer not to mention the possibility of such a check.

Diagnostics is best done during the cold season, when the outside air temperature is lower than inside. The difference between the internal and external temperature must be at least fifteen degrees. High-end equipment will help you see the thermal picture in the house.

A thermal imaging survey consists of:

• thoroughly conducted interior photography covering the entire area of ​​the house;
• external survey, revealing defects of the roof and facade;
• processing the results;
• processing thermograms on a computer;
• drawing up a final report containing detailed descriptions of the discovered deficiencies, and tips for their removal.

For shooting, it is necessary to first provide specialists with unhindered access to walls, corners and windows, removing all foreign objects. Also, the room should be checked for moisture. If excessive moisture is found, the cause should be eliminated immediately.

A rare owner would refuse such a useful device as thermal imager. However, its cost discourages many. There is a way to make such a device with your own hands. The first homemade thermal imager was made by German students. You can find instructions for making such a miracle of technology on the Internet and try to build something similar. Such a device will always be used in the household.

We will be very grateful to you for subscribing to our channel or recommending to friends and acquaintances on social networks. And also, go to our sites, see the information you need, call, ask, consult, order:

Country master -https://dachamaster.org

DM-Cleaning -https://dm-cleaning.dachamaster.org

And if you are just interested in what we are writing about, we will be very grateful for the support of the channel's authors not only with comments, but also with a little material motivation)))