A useful homemade product that will help to smoothly fill the floors and more. Collected and satisfied

Soon the floors will have to be poured, I remembered the method with which I leveled the ceiling with plaster, but it will not work for floors, I decided to make a suitable homemade product.

Preparation method

I bought four corners, the same number of connecting and ordinary nuts, plus two hangers and four washers, but they were not useful. Then he fastened the plate with rivets to the corner, squeezed the nut with it and again "sat" on the rivets.

It's better to just grab it by welding, but there is no welding machine, and I don't know how to use it, so I get out. This operation must be done with all corners.

Now the bolts

Yes, you need to make the bolts, because I did not have the required length, I used the stud I have. The nuts will play the role of heads, he also fixed them with rivets, having previously drilled holes for them.

At the end, you also need to carve a groove that will hold the loop from the wire.

The finished homemade part

This is part of the attachment for the string beacon, the string will be a stretched wire.

Four such fasteners are needed, they will set the direction for the rule, which will form an even concrete screed. To do this, I will fix the corners to the walls, through a distance that will block the rule.

Then I will stretch two wires, adjusting the bolts, align them with the horizon and each other, then I will throw mortar under them to give rigidity.

It remains to wait until it dries and the beacons are ready, it will be possible to fill the screed. As you can see, everything is simple, then I will dismantle everything and install it in another room. Walls and ceilings can be plastered in the same way.

Subscribe, share and comment, like, new story soon!