The homemade product helped to clean the bath drain without disassembling the siphon in 10 minutes

I decided to make a homemade product that will help to easily deal with specific blockages in the bathroom. I must say right away that it is easier to envisage preventive measures and install a sieve-cup on the drain, I advise everyone, but not for myself, such things. But why do I need easy ways, let's go make homemade products.

Manufacturing

For manufacturing, I needed a spring, I thought to build it myself from a thin wire, but I had it ready, I was lucky. Now it must be fixed to some kind of rod, you can use a wooden branch, but I had homemade pipe from a pet bottle, inserted a spring into it and fixed it with superglue.

Then I bit off the tip of the spring with self-tapping screws, and I got a mini-cable with a hook.

Practical check

I inserted the device into the drain and began to scroll it clockwise, after a while the tow from the hair began to wind on it, pulled it out and repeated, again the tow.

There were no more hairs in the siphon and the water flowed freely into the drain. He took the tow off the spring using a bag, squeezed it through it with his fingers, and turned the bar counterclockwise, the spring twisted out of the hair, like a screw from a piece of wood. The very class that

to remove this blockage, I did not have to remove the screen and spin the siphon. I spent ten minutes on the device itself its time, it would take about an hour.

How do you like such a homemade product, or do you have other methods of dealing with such a scourge?

Subscribe, share, like, new story soon!