Made a convenient, but at the same time simple carrying for firewood at no special cost in just 10 minutes.

I think the one who has a stove or fireplace in their home, knows firsthand what is carrying firewood to its destination.

Usually while carrying a bunch of heavy logs not only hands get tired, but also clothes get dirty.

Yes, and you have to go after them constantly from time to time.

therefore decided for convenience to make a homemade carrying from scrap materialsthat were at hand.

What came of this, we will consider below.

For making the carrier took two trim panelingthat lay idle.

AND in the center of each board I put the markings with a pencil, as shown in the photo below.

Then he dismissed the boards with a jigsaw according to the applied markings.

Same for making carriers for firewood took an unnecessary belt from an old bag and a regular sugar bag.

Belt from an old bag.

Then with scissors cut off excess fittings from the ends and, bending the belt in half, cut it open.

The result is two identical, strong enough handles.

Then he proceeded directly to the assembly of the carrier.

I took two lining boards and placed them on both sides on the edge of the bag.

The length of the lining boards should be equal to the width of the bag.

The strap is folded around the lining, as shown in the photo above.

With self-tapping screws fixed the handleand lining strips with each other on both sides.

I did the same on the other side of the bag.

As a result in just 10 minutes turned out comfortable and spacious carrying for firewood practically no cost.