Warm slopes with their own hands: fast installation slope of the plastic panels

warm slopes (Installation) - quite a time-consuming process. Installation of slopes must be done after the installation of windows. The first thing you need to install a window sill.

Plastic window sills should be installed with a slight tilt to the side of the room. Otherwise, moisture will accumulate between the window and the sill, which will lead to the emergence of mold.

Today we tell about how to close the windows with plastic quickly and beautifully. The panel consists of two plates between which PVC is extruded polystyrene.

Sandwich panel for PVC slopes in length can be up to 6 meters. width up 70 cm. Plastic panels are smooth without ribs are excellent for the slopes.

Pros:

- On such panels is not condensed moisture.
-They do not crack unlike plaster or drywall.
- Easy to cut to the required size and look attractive. - The material is resistant to fire.
- polystyrene has good thermal insulation inside.
- Such panels comprise only 4% of styrene and other chemical substances. So they are environmentally friendly.

- In addition, the panel does not have a high cost.

Mounting slopes

Top panel attached to the starting strip of PVC and another double-sided tape. Pre-primed surface, to tape well kept.

Using screws, the outer edge of the window are mounted, too plastic strip starting in the color panels. They will be inserted into the panels themselves.

Zapenivaetsya gap between the panel and the slope (only the edge). On one side of the panel holding due starter strip and on the other be fastened foam. But too on edge, do not apply the foam, then to be comfortable to wear area.

Dress top Angle F-shaped PVCWhich will block the cut seam.

These are all the main stages of work with the installation of beautiful, warm, smooth slopes. Sign up for zen.yandex.ru/remonts - RemontDom channel. We would be grateful and huskies!