Burst light: how to unscrew the cap from the cartridge easily

Some may seem ridiculous question - how to unscrew a light bulb. But sometimes it ceases to be funny when the light bulb literally explode and crumble into pieces and base with sharp edges left in the cartridge.

Cap paws may become welded to the cartridge. Unscrew the hands it is not given the opportunity. Find out in advance how to cope with this problem, to remember and to solve it, when there will be a similar situation.

Bare hands to unscrew the cartridge should not be. The rubber gloves, too (they can be cut by accident).

Disconnect switch and machine in the panel. Now you'll be sure that the lamp socket is de-energized and not energized.

If the dark, ask you to shine a flashlight in your phone. Remember that the base and lamp are heated, so wait about 15 minutes, and then get to work. When you wait, remove the debris on the floor.

Some removed the remains of the bulb using pliers. You must first remove the debris, and then caught the edge of the cap and gently unscrewed.

Bottle

There are more simple and unusual way. Handle any. The main thing to shut down! You will help an empty plastic bottle. The neck is great part of the cap. Fit any bottle: a half-liter or three litas.

Now you need a lighter. Keep your neck of the bottle and a little heating up outside.

Immediately thereafter screwed into the socket. Wait about 2 minutes, to the neck of the bottle, "soldered" to the cap. You can press to secure a couple of seconds.

Begin to turn counterclockwise. In this simple way you keep the cartridge in one piece, unlike the way with a pair of pliers.

channel RemontDom: Please Like, Share in the social. networks. Thank you and all the best!