Refinement of the level with a pet bottle to hang furniture evenly

The revision will allow you to even hang cabinets and shelves, even if the hangers are not installed on the same level. Something similar, I met on the Internet at our hardworking Chinese neighbors, only they proceeded from the fact that the suspensions would be in the level, and you just need to determine the exact width.

Finalizing the level

I used bicycle spokes to establish the vertical, and I also used them to make a gap for clamps from a pet bottle. Along the edges of the level I fixed three knitting needles with electrical tape, at first I used vinyl tape, but it does not hold the temperature well, so I wound a rag over it. Then I cut a half liter PET bottle, put it on top of the needles to a level.

He blew the plastic with a hairdryer until he was tightly loosening the instrument, then he pulled out the knitting needles, removed the plastic and divided it into two parts with scissors. I put the obtained clamps back on the level, attached a corner, and made two holes from the edges to install the spokes. He took off the clamps, inserted the knitting needles into them, and put them back on.

It turned out modification, which you can set the width for the anchoras the clamps move horizontally along the tool. But the main thing is that you can move the needles vertically, make accurate markings, even if the suspensions are fixed crooked horizontally. Naturally, when removing the size, the cabinet or shelf should be level with the horizon. I don’t know how it was possible to clearly explain the manufacture, and the idea of ​​completion, but I will release a more detailed video on the channel soon.

Subscribe, share, like, new story soon!