Insulation and siding - the frame is almost ready! The story of how we bought the dacha: the final

Not every purchase is fun... IN the first and second parts we told how a participant FORUMHOUSE Under the nickname Evgeniim, he bought a dacha, which for a number of reasons had to be demolished. But sooner or later, any problem is solved and our hero, overcoming some difficulties, builds a new house. What he does - read on.

Warming

Before starting construction, I rummaged through the entire Internet, re-read almost all construction forums. Much clever has been written, but you will not find what you need. About OSB - how many people have so many opinions. How and where they do not nail it. In the end, I decided to do it without OSB. And why is it needed, if you need to nail it onto the crate, and what good is it - what would it be? And if you nail it without a crate, the couple has nowhere to go. And if steam does not come out, mold will appear. Wind protection on OSB is a waste of money.

After all that has been read, the head is in a circle. Some say that, others say that. And, I read, looked and did it my own way.

As a result, I did this:

• nailed on the frame a bar 45 * 45 for overlapping insulation, nail 90;
• I laid 50 mm mineral wool (I did not know at that time that it was rubbish);
• wrapped in a windscreen.

Regarding the insulation: there is a lot of talk, there are a lot of topics, but where exactly and what kind of insulation, what density - there is little information.

After the overheated warming of the mineral wool, it ended safely and I did not take it anymore, and I will not take it and I do not advise you. I bought 50 and 100 mm basalt slabs for the walls, roof and floor. I put soundproof stone wool slabs into the partitions and interfloor floors.

It turned out: walls 200 mm; partitions 100 mm; roof 150 mm (I know that a little) but nothing else. Let's take a winter and see what to do next. The floor was redesigned after skew-handed builders and eventually insulated 200 mm.

Siding

I had nothing to do with siding before, in principle, it turned out - nothing complicated - cut and paste. Siding I'm 80 thousand. rubles together with delivery came out. I bought two more tours of 7 thousand rubles for editing. r., but it turned out to be superfluous. You can cope with one ladder for complete convenience, two are better. Siding was cut with a grinder. Installation is best done in warm weather - it cracks in cold weather.

Floor

About the floor, the same as with OSB, who as he can and as he wants, and sculpts. After everything I read and saw, I did this: a rough floor board of 25 mm, one might say, with a natural gap, since it is not planed. Slots from 2 mm to 8 mm. Cotton on top without any films from below. On top of the cotton wool there is a vapor barrier, on top of the vapor barrier a bar of 40 * 90 mm and on top of plywood 15 mm. In the bath and the corridor where the tiles will be, I put a moisture-resistant drywall on top. Above, somewhere there is a laminate, somewhere there will be PVC tiles. That's all for now!

What do you think is the best way out of my situation, or was it necessary to restore the old house? Write in the comments!

Like it, share the publication with your friends!

Subscribe to our channel—we are working,so that you receive useful and relevant information!

Useful material:

• How to install a wooden post so it doesn't rot: part 1; part 2; part 3.
• Smart lighting in the home: a personal experience.
• How to make an adobe block with your own hands: technology, recipe.

Watch the video - A gazebo in the garden: advice from members of the forum on how to get creative with work.