Why window installers should and slopes do

In principle, it would be worth it for the installers of the entrance doors. Usually I meet such a situation, the installers came, installed it, froze and set sail, only in rare companies, there is a master who makes the slopes next. Of course, you can understand, installation is quick money, and there is so much fuss with finishing.

Case from practice

Because of this situation elementary hack comes across, then the windows will be made larger than necessary, and they are cut into the walls, because of this it is necessary to remove the old slopes, otherwise they will "go" right up to the double-glazed window. There were also installations with a skewed frame. And now, the situation turned out that the installed window was with an old, upper slope that had to be removed.

By the way, in such a situation it is necessary to lay something soft on the windowsill, otherwise, a piece that has fallen off unsuccessfully can easily break through it. When it was removed, a slot with a finger thick was found at the top, for such a turn I was simply not ready, but

the gun with foam remained in the village. I had to buy "amateur" foam to fix the situation, and this time.

Then I installed the corners and guides, until tomorrow everything will dry out and you can plaster. Such is the story the conclusion is that if the installers made slopes after themselves, then there were much fewer such cases.Have you had to complete the work of the masters?

Subscribe, share, like, new story soon!