How to save up to 15% on fuel and increase furnace efficiency by 38%

You can't do without a stove in winter. If you have a stove, fireplace, boiler, then this article will be useful for you. A new device - a fan heater for the stove will come in handy in the house, in the country, in the bathhouse.

It is known that cold air goes down, and hot air tends up. When we set fire to wood in the stove, they slowly ignite and warm air goes to the ceiling. Air layers with different temperatures are formed.

So that the air was the same everywhere, and there was a rapid heating of the premises, they came up with one simple thing - a heat fan for the stove.

It forcibly "drives", mixes the air, preventing the warm stream from accumulating on the ceiling. As a result, we get a quick heating of the air in the house, bath, garage, etc. premises.

A fan for a fireplace, stove is a compact device that consists of a heat-resistant base, thermo-electric module "Peltier", blades (from 2 to 5 pcs.), motor, handles to make it convenient to carry device. The device is made, as a rule, of special aluminum coated with a protective layer. Therefore, the fan is lightweight (about 600 g) and not difficult to carry.

The mechanism is installed directly on the hot base of the stove or fireplace.

He doesn't need batteries, accumulator and electricity.

Works by itself according to the Seebeck effect. We will not explain what it is. Information can be found on the internet. The main thing is that it works.

Furnace fan heater manufacturers promise 15% fuel savings and increase the stove's thermal efficiency (COP) by 38%.

How does the device work?

You just need to put the mechanism on the stove and when heating the fan base to 45 degrees, the blades begin to rotate, disperse the air. A jet of warm air is felt from a distance 5-6 meters.

The higher the temperature, the faster the fan starts to spin. When the oven cools down, then the fan itself dies down and stops working. It must be remembered that heating from above 400 degrees is dangerous to the fan and may destroy it. Therefore, it is better to additionally buy an oven thermometer.

The mechanism works silently, on the machine. It doesn't need to be fixed. Just place the fan on top of the oven to start it on its own. The only thing to remember is do not place the mechanism in the center of the oven. The device must be installed so that there is access to cold air. Everything is indicated in the instructions. Is there some more fans with installation on chimney.