A simple but useful scratchbuild of trimming sewer pipe for collecting dust when drilling.

after the repairsalways stay the remnants of building materials.

Often they are simply thrown away as unnecessary.

Although this rush is not worth it.

If desired, the ability and imagination one can do very simple and useful homemadeTo help out if needed.

What can be done, eg, pruning of the sewer pipe. Consider the following.

After repairs in the bathroom was scrap sewer pipe diameter of 50 mm and a length of 24 cm.

From it and will make simple and useful home-madeWhich has not just come in handy during the repair work in the future.

To begin using the front blade zapilivaem end of a sewer pipe at an angle of 45 degrees (On the opposite side of the socket).

If the end is not at hand saws, saw off the end of the pipe as it is possible hacksaw or grinder.

Then using a power screwdriver to drill holes in the pipe as shown in the photo below.

Then set the plug in the sewer pipe socket.

Here's a useful home-made and ready. The result is a simple dust collector.

The idea of ​​its creation arose, when the hand was not a vacuum cleanerAnd it was necessary to drill enough many holes in the wall.

Remove the crushed material and dustFormed during drilling, not really want.

BUT homemade dust collector with this great job.

Now it is a simple homemade took its place in the tool box and again and again come in handy.