How quickly and accurately trim the linoleum around the pipes and on the perimeter of the room.

One of the most important stages in the process of laying linoleum is an hispruning. At first glance it may seem that This is no big deal.

But given the fact that most often when laying linoleum to the help of experts, few turns.

When you trim linoleumsometimes still have problems.

And then to have to just work I spend a lot of time and effort.

But this can be avoided, if you know a fewTricks of the Trade. What? Consider the following.

Start with the fact that start trimming necessary after Linoleum has Otlezhal in the expanded form.

Important! Laying linoleum is made with a small allowance on the wall.

Immediately take up fitting the linoleum near the heating pipes is not necessary. They should go back even before the installation of the baseboards.

But you first need to trim the linoleum on the perimeter walls.

Do it quickly and accurately simply using stationery knife and spatula.

linoleum is necessary tightly pressed to the wall and make vertical cuts to the floor.

And now a little trick.

To facilitate the cutting, the intervals between the slits should be equal to the length of spatula.

Then one confidence motion, substituting a spatula to turn intervals, you can quickly and accurately cut off completely unnecessary part of linoleum.

As for cutting linoleum near the heating pipes.

That is, perhaps, the most problematic place for beginners.

Careful pruning linoleum with a knife in these areas could It takes a long time.

But there is a little trick.

To quickly add on to the pipe instead of linoleum cutter, you can use the crown of the tree (suitable for the diameter of the pipe).

In this case the main cause markup correctly(Measured transfer pipe diameter on linoleum) and the drill hole think were not working.