How to drill the tile so that it is not cracked.

Ceramic tile lasting, But at the same time fragile Fracture finishing material. Therefore it is not surprising that sometimes when drilling holes in it obtained chipped and cracks.

But this can be avoided.

We just need to know features and the right technologyTile drilling process. On them will be discussed below.

Let's start with the fact that the surface is covered with ceramic tiles a layer of glaze. It is quite durable and smooth.

Drill according to this surface easily slides that could damage it.

To avoid this, the place of the future holes paste the masking tape and causes marking.

Now we proceed directly to the drilling process.

The first step is to drill tile itself.

To do this, use the gun (at low speeds) using Drill down on the tiles, drill hole.

Important! When drilling tiles impact power mode can not be used.

All dust is generated immediately collect a vacuum cleaner, inserting pipe under the drilling site.

After the thickness of the tile is passed produce replacement drill.

Instead pen drill set drill on concretey and deepen the hole to the desired depth.

It remains only to clean the hole from dust and can clog the dowel.