Enclosures for the plinth, the pros and cons of setting rules

Repairs have already been made, and you suddenly discovered that you need to add another outlet in the room and at the same time break the wall and lay a new line have no desire and money. The output will be the implementation of the wiring in the plinth. In this article we will talk about what kinds of podrozetnik exist, how to properly set up and what advantages and disadvantages they have.

Specifications Enclosures for plinths

There are two versions of the product, namely:

1. Outdoor installation. Thus podrozetnik tight to the baseboard and the floor.

2. Wall mounting. In this embodiment Escutcheon fixed to the wall and the baseboard and the floor contact no.

Podrozetnik itself is made of a fairly rigid plastic and has a universal design that allows you to securely fix not only power outlet (for connection of electrical appliances), but also the phone, network, Internet socket etc.

Important. Escutcheon of their design should clearly match the design of the plinth, so these items must be purchased once and preferably one manufacturer.

How to mount the plinth for podrozetnik

In fact, the installation of this product is very simple and it can handle almost any novice master. the algorithm is as follows:

The first thing we need to prepare the tools and we need: dowels, hammer, screwdriver (screwdriver), pliers, screws, rulers, markers, stationery knife.

Once everything is ready the process of installing a plinth and lining inside the wire feed starts.

Then, after determining a location socket mark up and cut the plinth itself.

And if you have chosen a wall-mounted version Escutcheon the incision is made in the upper part of the skirting board, and if the outdoor version, then skirting is cut completely.

In this case, the incision must always be clean from all possible burrs to prevent damage to the power cable.

After that stretch the power cable and proceed to the installation of the Escutcheon.

For this podrozetnik are putting to the seats, note by a place marker for drilling Wizard, then drill and fasten the seat podrozetnik on the baseboard.

Positive and negative aspects of such products

The advantages of this type it is possible to carry the following points of installation:

1. For the installation you do not need a new Stroebe on the wall, which means that it is not necessary to spend time and money on a new repair the wall.

2. Installation is extremely fast, as simply prokinut in a special niche plinth power cord.

3. With such laying damage the already mounted (old) wiring damage is almost impossible.

4. Again mounted socket is almost invisible, which means it does not spoil your view of the interior space.

In addition to the advantages in this method of installation, there are drawbacks:

1. Packed in a baseboard wire is more vulnerable to possible mechanical damage than wires, immured in the walls.

2. These sockets are easily accessible for small children, so to avoid injury must be in addition to worry about the installation of special curtains or already purchased the outlet with a design.

3. Just in case of flooding of the premises, such a line would be faster in the water, and the combination of water and electricity - a duo that is dangerous to human life and health.

Note. A more practical alternative is to use a wall embodiment, since the nearest floor Escutcheon formed hard- places that will accumulate dust and even in wet harvesting time when negligence is possible to fill a power outlet, which also extremely undesirable.

conclusion

Enclosures for Use of a plinth - is a great way out of a situation where you need to add another outlet in the room with minimal alterations and financial costs. If you liked this article, you will appreciate her huskies and thank you for your attention!