Useful content

Homemade bed: Budget pleasure

click fraud protection

Makeshift beds for home and garden: constructive, design, photo

According to Forumhouse craftsmen, which is difficult to disagree, furniture made with their hands, it is not only a decent savings for the budget, but also lots of fun. When there is a desire, the possibilities are even in the waste heap and with a minimal set of tools, and with the desire of our rukodelnikov okay. In one of the articles I have already talked about bed convertible, today we will focus on simple designs with minimal cost.

Content

  • Bed 1800h2000 mm with their hands (first experience)
  • Bed 180x200 cm in rustic style
  • Option fiscal villa bed 140x200 cm

Bed 1800h2000 mm with their hands (first experience)

Lutsenko

Member FORUMHOUSE

This summer, we tired of sleeping on a mattress, and was made a fateful decision gash bed. It took two days for the whole process (one of which was drying paint). The project - the idea of ​​his wife, I just cut out and assembled.

The design of the timber was about 100x100 mm, 50x50 mm timber, planks and boards 150x50 mm 100x20 mm as fasteners - screws 100 and 200 mm. Treatment of impregnated wood coated with a spray dye golden brown. Of the tools used circular saw, elektrorubanok, jigsaw and a sander with a screwdriver. In total, the materials took 3.5 thousand rubles. Massive frame made of beams, plank base under the mattress, the back decorated with "wave", an outdoor fixture. Done without sketches and renderings - polished, cut, tried on, handled all the details of impregnation, collected, gilding.

instagram viewer

So as a bed for the attic floor and push from sloping walls do not allow the dimensions of the room, a bed without legs, standing directly on the floor.

The bed is massive enough, and move it to the assembled problematic. To make things easier, the portal users are advised to use special felt pads. They fixed the sticky side to the furniture and not only simplify the adjustment, but also prevent scratches.

Later in the same style for a while with a bed craftsman made cabinets - turned almost set.

Bed 180x200 cm in rustic style

ReginaPiter

Participant FORUMHOUSE

I want to share the idea of ​​the bed, her husband burst into flames to make sure to the hands, made of materials that are available in the nearest hardware store. In the store the same, except for the usual board (dry), there was nothing else. The husband explained his idea, and I tried to recreate it in the constructor. Converged on such an embodiment.

The frame assembled from planks 40 mm - two pieces went on the sidewalls and in the legs, and three pieces - the headboard, team central beam (of the bars), as legs - two sawn stage 900x300 mm. Shield under the mattress - thirteen wooden slats (board 100x20 mm). Elements of the headboard and frame combined total felling. Balusters purchased at the corners, the same as was found, treated different.

Also in the case it went to a different metal fasteners - corners, screws, plates, screws (for the slats).

After the test assembly structure disassembled, coated glazing alkyd varnish, polished thereon fine sandpaper and coated with a second transparent lacquer. And to make it easier to move, under the legs glued pieces of carpet.

Surprisingly, all the work her husband new posts do without power, he had the garden saws, chisels, hand sanding and a file.

Impressive results when such starting.

The statement that it is easier to order furniture, ReginaPiter responsible way.

Of course, it is easier when it is not affected by the crisis, and have the financial capacity. But there is another reason - the pleasure of work and results, and the pride of her beloved husband, who until that moment the hammer in the hands not holding.

By the way, the bed was a catalyst, and in the house - home-made insulated front door, a table, and stop the couple are not going to.

Option fiscal villa bed 140x200 cm

TER Spb

Member FORUMHOUSE

Spread for example made me last year dacha bed. The main thing that prompted the manufacturer to do it - that together on a standard bed, 90x190 cm, we do not fit. First, of course, looked for options in the stores, did not attract either bad or expensive, here and decided to do on their own.

Dimensions future bed asked bought on the occasion of the mattress 140x200 cm, the revision of the "bins Motherland" revealed the bars from the pan furniture, a large timber out of the machine from work and a couple of boards. How it all put together, it occurred without special programs and rendering. Instrumental base is also not impressed by the range - drill, jig saw, screwdrivers and plane with a tape measure.

Unlike previous craftsmen, TER Spb assembly began with the central beam, it immediately chose the slots under the slats, "tied" sidewalls, made legs, put the cross and reinforced corners frame.

Collected back from the vertical trims on the top bar of the sill scrap I went to bed attached with screws.

The family council decided not to use tint means - used clearcoat. After a couple of nights, it became clear that the stiffness of the slats and the mattress is not enough, and the basis of a sheet of plywood laid down.

And it was suggested again that it is easier to buy a large hypermarket very cheap bed, and again the answer - in the key of our rukodelnikov.

TER Spb

I made the bed with his hands and thereby kill several birds with one stone: to save money in the first place, used some waste material to useful work, and secondly, and thirdly - test yourself on the ability to do furniture.

like Lutsenko, TER Spb I made from a nightstand found in raspilochnoy hypermarket pieces of chipboard and MDF pieces. Also had to purchase an edge band, angles and pivot bearings.

In section of furniture in the interior - mass and other interesting examples, and how to get a convenient storage system - in a self-made material sliding-door wardrobes. In an article on the style of "Shrek" - speech about the piece of furniture and utensils from the pallet and dead wood. In the video, the participant portal tells how he not only did the entire interior trim in the house, but also furniture.

Discuss the article and read other materials devoted to country life you can on the websiteFORUMHOUSE.

Subscribe to the channel so as not to miss the next release!

Mini-nuclear reactor with a 10 kW generator. Installation for the power supply of the homes of the future?

Mini-nuclear reactor with a 10 kW generator. Installation for the power supply of the homes of the future?

Previous articles on radioisotope nuclear installations have generated interest. I will indicate ...

Read More

Chainsaw attachments that not everyone knows about. Part 1

Chainsaw attachments that not everyone knows about. Part 1

Most believe that a chainsaw can only be a chainsaw for sawing wood, for building from wood. Some...

Read More

Instagram story viewer