How do I make the capacity of a conventional package for transplanting tomatoes
Now began a hot time among farmers. In April transplanted tomato seedlings of generic containers into individual containers (middle lane). And it is so much that is not enough cups. Come up with various options for swordplay tomatoes.
To further not dive tomato seedlings, better to plant directly into the bulk tank. In this case, suitable self-made bags that can be made from a single conventional packet. If you have accumulated a large number of packets, and you do not know where to apply them, make of them for seedlings capacity.
What you need
package;
scissors;
Scotch;
priming;
water;
seedlings.
Step-by-step instruction
1. Take the bag and cut off the handle.
2. Cut it on the sides to the bottom.
3. Fold the bag in half and cut to give 4 parts.
Now, each of the parts can be made separate containers for tomato seedlings, which will include up to 1 liter of soil substrate and even more. Therefore dive plants no longer have until landing in a greenhouse or open field.
4. Folded part of the package, as shown and seal tape (go and paper). The edges of the adhesive tape tuck.
It is possible to make any width as you want, but it is desirable that the diameter of the container is not less than 10 cm.
5. Bend the bag from both sides, as shown in the figure, and the bottom seal. Excess adhesive tape to cut the corners.
6. The result was a roomy bag. It is necessary to pour the soil and plant to plant. The edges of the container could be tuck, so you had a chance to loosen them during the growth of tomatoes and pour the soil for the development of additional roots.
7. Drizzle seedlings.
Thus, one large package can be made small bag 4 for transplanting tomatoes.
You may be interested:
A pick tomatoes. Using tanks, through which increases the illumination of seedlings
The feed sluggish seedlings to grow well? Cooking miracle fertilizer
Subscribe to the channel "Country life"And put the Like!
Other useful articles can be found here.