How well do folk remedies to help fight mold in the bathroom. I conducted an experiment

housewives are often faced with the appearance of mold in the bathroom. This occurs when water stagnates on the bath rim after water treatment and when the room is not ventilated. Recently, there was mold in my bathroom.

At first I tried actively to rub her with a sponge using a cleaning agent for baths and squirted the acid from lime deposits when cleaning the tiles in the hope that they will act until the mold is small, but it is not It helped. Mold has become a highly distributed, it's time to think seriously about how to stop it and eradicate.

Caustic chemicals with strong odors do not want to use as children bathe in the bath every day. I sought the help of Internet resources. I found a few recipes. Origin required 250 ml of hot water, 2.5 dining soda spoons, 1 spoonful of detergent.

First, soda must be dissolved in water, then add the powder and mix well.

With the toothbrush with bristles harder plot the resulting solution to place the cluster mold. It should be well rubbed in all directions.

Upper mold layers immediately erased. Visually it was noticeably cleaner. However, the mold is not completely gone. Remained thin strips under the sealant layer.

To fight them handy second found the recipe. He demanded cotton pads, liquid bleach "Whiteness" and gloves to protect your hands.

Each cotton pad should be abundantly pour bleach, and then firmly attached to the tile seams. The recipe mentioned that the agent acts quickly and the result is seen in a couple of hours, but I err and left wheels at night.

the duration was approximately 10 hours. When removed the wheels and saw that most of the mold removed, but again, not completely.

I had to try to put on the next night hydrogen peroxide. The result of this tool has been swept up bad. The picture is almost not changed.

Subtracted another recipe. To combat the mildew and maintain the cleanliness of the tile seams helps essential tea tree oil. The secret of its antiseptic and antifungal activity. The atomizer is poured 300 ml of water are added 10 ml of oil and 5 ml of alcohol.

The solution should be regularly sprayed with vertical and horizontal surfaces in the room bathroom in places where there is a risk of mold. It operates such a remedy is not too soon.

Total: after using all these means the kind of place, mold, has improved, but remains of the mold is still visible.

Procedures should be carried out several times repeated to achieve the ideal of purity. The bathroom door should be kept open in order to reduce humidity. the remaining water will evaporate quickly, not allowing mold to grow.

p.s .:My HouseHe is trying to give you the most important, useful information. If you liked the article, please put "like".subscribe to the channel - in front of a lot of useful and interesting information!