We are building a gazebo with barbecue: comprehensive approach to the recreation area

Construction of the original pergola and brick oven-barbecue with a detailed description of construction and estimated phases

Each builder - a reason to build a gazebo with a barbecue. Someone wants to build on the plot recreation area for a pleasant stay with family and friends. Someone practicing on small architectural forms to the construction of a country house, and at the same time make an original gift to his parents - as a participant in the portal with the nickname Asmer, who decided to build on the site of the original gazebo with barbecue.

Asmer

On FORUMHOUSE accepted tips to help novice developers. So I created a topic on the website on the work done for the construction of the gazebo with brick oven, barbecue. I hope my experience will be useful and interesting to many participants.

Content:

• How to make a foundation under a gazebo and a brick oven
• How to build your own gazebo
• How to fold the oven-barbecue
• How much does the construction of a beautiful gazebo with barbecue

Slab foundation under the gazebo and a brick oven

summerhouse Asmer I wanted to build a four and a half months — it was necessary to be in time for the anniversary of his mother. Having estimated budget for the construction of the gazebo with barbecue, the user realized that hire workers will not work. Therefore, I decided to make an arbor with their hands together with his father.

Works on the construction of gazebos were only on weekends and during holidays.

The construction of the gazebo was divided into a series of sequential steps:

1. Drawing up a design project.

Size arbor 4000h5000 mm. "Box"- peskotsementnye blocks. The walls are plastered.

2. Choosing the type of foundation. For this Asmer I created a separate topic on the website, where people are asked to help him with the choice of foundation design for the gazebo with a brick oven.

Asmer

The soil on my site - loam and clay. Plodorodka about 15 cm. GWL spring about 1.3-1.5 m at the lowest point portion. Spot development under the arbor 1 m above this point. The difference in height is about 25 cm. The main difficulty - in a portion of about 1 m is broken brick layer. So I had to break a head, how to choose a foundation under the gazebo.

Before the construction of the gazebo user made pile-foundation rostverkovy under hozblok. To do this, he dug a trench depth of 1.5 m. The reinforced concrete pillars produce square section 300x300 mm with the "heel" 500x500 mm. Then pile lowered into the trench and buried.

Suspension poured on top of raft foundation.

Despite the relatively small material costs for the construction of pile-rostverkovogo foundation, the whole economy negate the increased labor costs. After much thought, Asmer I have decided to erect a gazebo with barbecue conventional foundation slab 250 mm thick.

The process of construction of reinforced concrete slabs:

Digging excavation.

Construction livnevki to divert water from the gazebo.

Digging trenches along the perimeter of the gazebo for laying drainage.

Laying efferent drainage pipes.

Installation of plastic well for the drainage system.

Laying the geotextile around the perimeter of the foundation slab.

Laying drainage pipe wrapped in geotextile.

Installation of the tap to clean the drainage system.

Backfilling with gravel drains.

3. Preparation of the base under the slab foundation. To do this, the user spread geotextiles and scattered sand on it.

On filling the excavation took about 13 cubic meters of sand.

Sand ramming electric vibratory plates.

Asmer

I did not take a compactor for rent, and bought it. I thought it was more useful to me in the construction of houses and construction of garden paths and entrance area to the site.

4. Tying reinforcement cage. On the layer of compacted sand and spilled water spread by a polyethylene film. Then knitted reinforcement cage bars of 10 mm in diameter in two layers with a pitch of 250 mm.

The reinforcing frame is not lying on the ground, and was in the "body" of the plate and joined in the work, under the rods planted stand (locks) - "chairs".

5. Installation of formwork and pouring concrete foundation under the gazebo.

Asmer

On the stove it took 5 M300 concrete cubes. Lighthouses did not, what then regretted. It is easier to flatten the mixture, and the surface of the base would have been smoother.

6. Masonry walls of the gazebo. Dismantling the formwork, the user has begun to erect walls of 4 peskotsementnyh slotted blocks.

From the original plan - pouring concrete pillars and installation of monolithic Laying nets, the user has refused.

This would lead to unnecessary complication of the structure and the extra lengths of rebar just cut.

To zamonolitit studs under the tying bar into the holes have cut block.

For anchoring studs in concrete, they are clipped, t. N. "Elephants."

Supporting pillars made of timber section 200x200 mm.

Solid wood gazebo gives a special aesthetics.

For post mounting in the bottom end was drilled two holes for fitting.

Final assembly was conducted on the sealant.

On the upper piping went bar 150x200 mm cross-sections which are connected to pillars long screws and nails.

All wood planed plane.

7. Building roof system for gazebo with barbecue. The work is divided into stages:

Manufacturing stands for the skate.

Rack fastened to the studs.

The ridge is made of double boards 5x15 cm.

Zapilivaem rafters and fastened with the help of both corners and nails.

Tightening truss system.

Rear gable gazebo sewn imitation timber.

All wooden elements are painted gazebo in two layers with the texture of "nut".

Masonry brick oven-barbecue for gazebos with their hands

Because the Asmer built a gazebo and a brick oven-barbecue for the first time, it was not without mistakes, but thanks to the diligence and accuracy all happened.

Asmer

poryadovkoy furnace is visible in the picture below. The two "legs" walling blocks formed between them in a number of half-brick, t. E. It obtained the letter P. It was not the best idea. Inexperience I did not consider the height of the base, but it must be a multiple format bricks. I also forgot about the thickness of the seams. As a result, it not passed over 1.2 m, and 127 cm (five bricks + joints). The level does not match and I had to fill in a belt of the solution to adjust the height of the base-to-height brick "legs-columns".

Shelf for the top row of brick furnaces gazebo user made using the corner.

The use of metal corner - not the best option when building brick furnace brazier, t to the metal expands when heated... This can cause cracks in the upper row barbeque oven.

Masonry walls of the furnace.

Laying the furnace chamber of fireclay bricks.

Laying the furnace was carried out on a refractory mixture.

Laying the sweeping conical furnace.

Offset bricks: 3.5 cm at the sides of the sweeping and 1 cm from the front portion. The rear of the sweeping runs parallel to the wall of the gazebo.

Masonry brick chimney furnace brazier.

At the user's words, the test furnace hot kebabs on the grill were successful. Craving a good smoke in the room did not go.

In the manufacture of a brick furnace arbor out:

• facing brick - 320 pcs .;
• the usual "red" brick - 85 pcs .;
• fireclay bricks - 70 pcs .;
• refractory mixture - 1 bag;
• metal corner shelf 70 mm - 2.2 m (1.2 m + 1);
• metal corner shelf 40 mm - 3 m (3 pcs. a length of 1 m);
• cement - 4 bags.

Finishing work on finishing stone pergolas

Binder roof arbor made of imitation timber 140 mm in width.

Filing painted with white paint, which emphasized the natural texture of wood pattern.

Top simulation stacked plywood 6 mm thick - base for laying shingles.

Sinking chimney through the roof.

The roof is laid with shingles.

Mounting brackets for the gutter system.

Homemade dinner table for the gazebo.

Temporary lighting.

Beautiful garden furniture made with their hands.

Asmer

At the gazebo, I had already spent about 200 thousand. rub. I am often asked whether it was worth it. Reduce the estimate is possible only if you buy a used / y materials, to reduce the thickness of the timber, and it is ugly. Or to move away from technology, and to save on quality. For example, do not drain, the normal "cushion" for the foundation, and then to think, crack or crack plate. The savings leaves sideways. Are building something for yourself!

Gazebo with barbecue user built in 2016, and continued its finishing 2018. He laid on the floor granite.

I collected from the base metal for worktops for kitchen area.

Set wash.

From the remnants of building materials made benches and shelves.

The kitchen area of ​​the arbor.

In the future, he plans to glaze the gazebo, and after construction to mount the water home.

The portal can be accessed from stages of the construction of the gazebo with barbecue.

On the topic we recommend the article: Various embodiments arbors to suburban area, How to build a stone gazebo for year-round use, How to make a tandoor own hands and What happens if taken for making tandoor woman. And: How to make a low-cost drainage system and on what grounds it is necessary to use drainage pipes in the geotextile winding Installation of sandwich chimney and the necessary fire-distance for its passage through wooden beams.

In the video - gazebo, summer kitchen with his own hands.

Subscribe to the channel! Craftsmen to join FORUMHOUSE!