The best way to interstorey insulating floors without the involvement of hired professionals
House warming, and particularly gender - a complicated procedure that requires special skills and knowledge. We describe below why insulate floors and how to do it correctly.
Why do it?
The main task of the floor insulation - the creation of a favorable microclimate in the home environment. With such work can achieve heat retention, alignment, and soundproofing. Furthermore, it is possible to avoid the ingress of cold air from the basement, in the case of the insulation coating interstorey between the basement and first floor.
How to Make warming?
In order to achieve the main and other tasks necessary to pick up the heater. Being familiar with the properties of each material, we chose the mineral wool. This is an easy, practical and cheap material. Compared with polystyrene foam, less combustible. Winterizing is done in steps:
1. Remove old coating or seal the slit in the slab (in our case, was the second embodiment);
2. Create a rough floor with the help of boards, which will be placed slabs of rock wool;
3. Cover board antiseptic bed vapor barrier layer;
4. Place the mineral wool in the resulting cell, leaving a gap of 50 millimeters.
Upon completion of the lay another layer of a vapor barrier and cover all milled boards. Later on these boards can be placed any finishing layer, for example, laminate.
In general, inter-floor insulation coverings, namely floor - a necessary procedure, which will make your stay comfortable in a new home. It is important to follow the instructions and then you can do without hiring professionals.
See also:
Sewage to give: the easiest option
Installation of roller blinds without drilling (forces of one young lady, disjointed with a drill)
Subscribe to the channel, the only way you will be informed of new publications - in front of a lot of new and interesting information!
p.s.: We try to give you the most important, useful information. If you have been interesting and helpful place "like".