Wiring diagrams ceiling chandelier

Probably not such a house where there is installed a chandelier, and from time to time, e making repairs, we will replace them. Usually chandelier located in the center of the room and is attached to the ceiling by a hook, and then only need to properly connect the wires, and this can be considered a work ended. It seems everything is easy and simple, but if you have little experience in such work, then explore shemku proper connection will not be superfluous. In this article I will tell you about the connection diagrams, ceiling lamps with different switches.

Hooking up a chandelier over one-button switch

Attention. Any work related to electricity must be carried out only after switching off the machine, feeding this room, or after disabling the opening of the machine.

Let's start with the easiest option when you dangle from the ceiling just a couple of wires. Thus, the wiring diagram in this case would look like this:

As you can see in this version connection, we do not even have to know which one is the phase wire and a zero, as there is no fundamental difference.

In case, if you still need to know which wire phase and a zero, then the following sequence of actions:

Since rely on the color coding is not desirable (not all electricians strictly follow the rules of color distinction) you will need a screwdriver indicator.

So, for a successful definition phase and zero need to feed the machine in the control panel and switch included. Now indicator screwdriver leans against the bare wires and where the LED lights up and will phase in the screwdriver, and where it is not lit - zero. After that, we disable the machine, and you can continue to work.

If you have a chandelier has a protective earth, but only two wires, the wire from the chandelier (yellow with green stripe) accurately isolate and leave it unconnected.

In case, if you have a modern wiring with a ground conductor (yellow wire with green stripe), then the connection diagram would look like this

That's the way look wiring diagrams chandeliers via one-button switch.

Hooking up a chandelier over dvuhklavishny switch

If in the case of one-button switch and two wires chandeliers was very simple, it does not do in the case of dvuhklavishnym switch without an indicator.

Determine which wires phase in the same way as described above, then feel free to connect the wires.

If the chandelier has a grounding contact, and from the ceiling you stick four wires, then this wiring diagram is as follows.

If all three hanging wires, the earth contact on the chandelier reserve not connected.

conclusions

As you can see connection of the chandelier is not so complicated process, and with a minimum set of tools and a little skill such work can be performed easily.

If the article was helpful, then place the thumbs up.

Thank you for your attention!