How to make a canopy made of polycarbonate?

Sooner or later there will be a need for regeneration of the visor in your backyard. It can be placed over the porch, become a protection for the car pool or shelter from the weather. In any case, you will have to pick up a good material for this. Most of the people in the recent preference for polycarbonate. This factor is explained by the fact that its strength is quite high, it is not fragile as glass. In this case, the durability while maintaining a decent appearance remains on the level. By the way, you can always give the canopy arched shape, as the roof is very good bend of a given material. Of course, the important thing is not to overdo it.

First, you must prepare the site by removing the sod and arranging the entire foundation area. If your canopy will be installed near the wall, you will need two or four poles for support. Some people pour concrete only where the piles are installed. In this case, no harm will be to design, since the material is quite durable. If you have it turns out the construction that will stand alone, you should do more than the four pillars for support.

So, your support concreted dry out, now came the formation of the frame. Here is a very wide choice, since you can take the profile, wooden slats or corner. Some respected runs that allow to form an arch for your canopy immediately. Going beyond the framework should not be more than a meter, or fortress construction will not. Do not forget about the creation of crates to have had additional support. Note that for example, of a material such greenhouses, or must have impressive support or understand the winter. Because in areas with high rainfall in the winter, it is quite possible collapse of the roofing material.

Not everyone knows that this material may vary with impressive temperature changes. In order to confront the problems with the roof, when drilling holes for the screws, it is necessary to provide clearance for protection against the scourge. By the way, bending the material needed in a time when it is already planned cuts.

Regions that differ hail or difficult climate, require the use of the most thick material. Better to take options that reflect the light, they have milk or bronze color.