Exposing myths about ways to stop counter

We all love getting something for free, probably most of us at least once but thought, how could I not pay for that proverbial light. So in this article I will tell you about the devices that supposedly make less of count or even stop it.

magnets

Unfortunately a lot of people are trying to reduce their consumption of electricity due to not quite legitimate methods, namely the use magnets. I want to say that modern meters are made of non-magnetic components and to stop them you just can not, you will spoil a maximum digital display. This means that the first controller, will write you a prescription for the replacement of the device, which is quite decent money. Not including spending on the purchase of the magnet itself.

Owners of old metering devices also should not deceive ourselves, because in most cases, have long been put Energosbyt Special non-magnetic seal, shared in the same, if they are to bring a strong magnet, change color or crumble.

So the next visit of the controller, you will be unpleasantly surprised sized fined.

Replacing the neutral wire to the ground

Just some citizens try "modify" its own grid. To do this, they perform at zero jumper on the "ground".

This method is in fact, in addition to the dangers to others, will not allow you to save a single kilowatt-hour. Since in the case, if for any reason in the network will change with zero phase. For example, the input interruption occurred, or on the substation perform work and changed the phasing, the alternation will change phases.

And it may happen that the previously grounded phase will be zero and the entire land (as usual for this purpose mount economists use heating pipes) It will be under the voltage of 220 V and the person who touches at this moment to the pipe, electric shock, which can lead to very negative consequences.

A modern electric meters have long been implemented to protect against such theft measures.

Puncture

There is also a persistent myth that via puncture can reduce the current flow through the meter itself.

But let us remember about the high-school physics and consider the Ohm's law:

I = U / R

Where I - current U - voltage and R - resistance.

As we see from this simple formula visible characteristic current dependence of the resistance and the lower the resistance the greater the current.

Since the puncture does not provide a reliable contact, then this place is pretty high impedance, which means the current will still flow through the meter. Through jumper current flows, but it will be so insignificant that the savings you will not notice. But insulation failure may notice a controller, which also lead to significant fines and trouble.

As you can see, all methods of "saving" actually bring one only harm you and your associates. If you really want to save on electricity, it should be dealt with working methodsInstead of looking for a way to cheat the management company or Energosbyt. Thanks for attention.

Dear Reader, my article was useful and interesting?! Then be sure to Put thumbs up, subscribe to my RSS feed ENERGOFIKSIK and share articles to social services. networks. It is very important to feel your support. After all, it will create even more high-quality materials. If you have any questions or suggestions, here is my email: [email protected]