How to simplify the processing of metals: homemade for home workshop

Portal users tell us how to make a bench out of the trash, drilling machine from the car jacking and drilling and stripping machine from b / a motor from a washing machine

On FORUMHOUSE collected hundreds of varieties of home-made machine tools and accessories. How quickly find what you need? Check out the selection of a number of budget and original solutions for those who like to tinker with hardware.

Content:

• Workbench from scrap
• Drilling machine from the old jack and drill
• Equipment for metal purification of the engines from the washing machine
• A set of essential tools

Homemade workbench of metal b / a Pipe

Ratex

user FORUMHOUSE

I need a universal table for work in the workshop. I decided to make it different from the trash. I took the frame from old greenhouses. At their base - tube section 3x6 cm. The wall thickness of 3 mm. Went on the counter board section 15H5 see. Planks bolted to the metal corners. To work with clamps, countertop do with the release of 5 cm on all sides. Distribute the plan, I set to work.

Basis bench - scrap metal.

User cut b / a of the frame. From pipes welded frame. Then he painted it.

Bottom to the legs Ratex welded M16 nuts. They Screw the bolt.

So workbench adjustable in height and table top adapts to your height.

Countertop user assembled from six boards of 3 m.

Underframe collected from old sheets of chipboard.

Plates are joined to each other by metal plates of 30x30 mm. Attachment points - in the center bottom and one at the joints.

Ratex

He wondered how the table looks. Bench height - 840 mm. For me at the time.

The height of the working surface of the bench out on 5 cm lower than the plane of the drilling machine. And conceived. Placing a bar under the workpiece can be drilled something long, with the support parts on the workbench.

Boards to the frame Ratex screwed bolts with round head Allen.

At the finish of works painted by the countertop. According to him, the best option - to close the sheet metal boards. But such a sheet in the bins are not lying around, and to buy - expensive.

Ratex

In order not to damage the tree, put on the table a small metal plate. At least something. Then I fixed on the bench vise. Bolted block with sockets for connection of electric tools. I put sandpaper. Bottom put grinders, welding machine, drills, rotary hammers, fasteners and components. I agree that this is better bench than to work on the concrete floor, like I did before.

Drilling machine and a drill of avtodomkrata

kuznecs

user FORUMHOUSE

I urgently needed to drill a lot of holes. Drill work - is not an option. I decided to make a simple drilling machine from the old jack on the "Lada". Principle - cheap and cheerful. I do not expect to get a very handy tool.

Machine guideway is made of a profile pipe section 40h40h3.5 mm. The guide tube is fitted a movable section 50h50h4 mm. To select a play on "sorokovke" fixed plate. The basis of the machine - channel. All parts are welded together.

According to said user, with the operating time, the machine drilled holes in the stainless steel 2400, 4 mm thick, collected in a "package" of 8 sheets. No drill is not broke.

kuznecs

Revolutions jack for grabs. Efforts are being made do not need. Drillers carried her to work. Guys drilled supporting plate 5 mm thick, 16 mm diameter drill bit. The machine coped with a bang.

Stripping machines of the engine from stiralki

Libral

user FORUMHOUSE

Offer to the users of the portal are two stanochka court made on the basis of engines from discarded washing machines. These motors - a real fount for home craftsmen. Motor 1350 rev / min. Emery did not to throw ground off cutting discs from the grinder. And that's what I did.

The machine copes with cleaning metal. Rough grinding of metal parts.

The basis of the machine - frame, welded from profile pipes. The engine is fixed by four screws on the metal plate.

Libral

Second stanochek I also collected on the basis of the engine by stiralki. Motor really weak, but does the job. Pure metals well. More often than not I clear all small things on it from rust.

conclusions

Do not expensive machine tool or of various trash afford any handyman. To do this, you need the straight arms and tools:

• Bulgarian;
• welding inverter;
• drill;
• set of hand tools and consumables - cutting wheels, welding rods and drill bits.

On the subject of self-made machine tools and accessories for home workshop recommend that you read the article:

• Homemade profilegib for 2000 rubles. Stepwise fotoinstruktsiya how to make their own inexpensive profilegib of parts from old cars and bicycles, bearings, threaded studs and channels.
• Stand for grinders with disc tilt. How to make the universal rack for homemade grinders a rotary mechanism and the possibility of cutting metal in two planes.
• Mini smithy with his hands. We are offering to you best budget option "villa" smithy - from the manufacture of the anvil of the old rail options to a portable forge.

In the video - what tools are needed for the construction of a frame house - advice to the builder on the basis of personal experience.

Subscribe to the channel and learn more tricks house masters, join FORUMHOUSE and you'll be on the shoulder!