Chic fence with a sliding gate with their hands

Fotoinstruktsiya on independent construction fence beautiful larch on foundation pile-screw

Subject fences to suburban areas - is eternal. How many people - so many options and fences. "People" of corrugated board, expensive brick, beautiful wooden or cost of grid-netting. We offer you another way to guard the site of the original envy their neighbors. A fence made of larch Planck, who made their own hands portal user with the nickname kazimir1.

Content:

• Horizontal fence with a sliding gate of larch Planck
• Why screw pile-foundation chosen for the wooden fence
• Durable coloring larch Planck
• How to fix larch boards on metal fence posts

A fence made of larch Planck own hands

kazimir1

Member FORUMHOUSE

I decided to share with participants FORUMHOUSE structure wooden fence larch. I came to him so. For fifteen years, tired of the old fence made of profiled sheet and swing gates. The house is decorated with a tree, a fence around the perimeter, too. Put on the facade of the trapezoidal sheet with the figure "under the tree" hand was raised. I decided. Whether that will be, and make a fence and sliding doors of larch Planck laid horizontally. Fence DIY, so tell about a personal experience. Maybe someone will come in handy.

So, anyone who wants to repeat the fence kazimir1 larch or make a withdrawal from edging boards yourself, we suggest to familiarize with technical solutions. But first we show some photos, which clearly reveal the "chips" fences.

Interesting design nuance - when you look at the fence from the street, just do not understand where his wicket.

"The wicket Invisible" is made specifically for the experience of a single and indissoluble wooden fence fabric.

Fence of Planck inside portion.

Later, in the middle of the span, the center will be screwed leveling bars. With them, the canvas becomes, at the user's words, the "glass" - a flat surface without waves and bends.

Now we turn to a description of structural elements of beautiful fence larch.

The foundation for a wooden fence and a method for durable coloring larch

The soil at the site kazimir1 heaving - clay. Therefore, in order not to bother with the tape base and a large volume of earth and "wet" work, the user has chosen a proven and reliable version of the base under the fence on problem soil - screw piles. Under fence posts twisted pile diameter of 76 mm (better increase the diameter of piles) and a gate of 89 mm.

To align used thin metal plates, which underlay between the end walls and "heels".

We proceed to the preparation of the strap, before you mount it to the posts.

kazimir1

I've covered the board with oil for wood from both sides. Bed terraced - to detect invoice larch and colorless layer. After winter tree as a new and looks good. Product consumption was two times less than the manufacturer, t. To. The tab before applying the oil, I polished with abrasive grit P150.

Users to process oil batches boards - 15-16 pcs. Planken kazimir1 He dyed and dried in the six goats. So the work goes faster.

The user also bought "cunning" wood screws with a drill, mill and samozenkovkoy a bit "star".

Color screws practically coincided with the color of the fence boards.

To simplify the work of attachment panels, the user of the manufactured sheet metal template with knockouts, a diameter of 1.5 mm under the screws, at the desired distance from the edges of the board.

kazimir1

Attached to a board pattern wood pierced with an awl and put it aside. Quickly and conveniently. It is run at a time, all the boards.

Preparing the materials proceed to the installation of the fence slats.

Assembling wooden horizontal fence on metal pillars

We tell you about the secrets that will allow you to make a fence Planck independently and without assistants.

kazimir1

The first thing you encounter when installing the fence - leveling lath. Bother with all sorts of laces not. It entered easier. He said laser levels lower level of the board. I make a mark on the pillars. Removed laser and, on this base, put down on label 115 mm, going upwards, ie. K. Strap width 12 cm.

Further, according to these labels, the user has set an upper bound of adjacent planks. Laser level is no longer needed. Boards with a gap set at 5 mm.

For attaching the strap to the metal post for them in advance screwed wooden base (boards).

Without assistants to fix the board in the second column, the user fastened the clamp on it, to which, in the pre-twisted into a board screws through a metal bracket, clings slats.

The bracket is made from skewers. Such a metal is easily turned in the place of hands. Finished board is pressed against the reference plane and fix. Then adjust the hanging end of the label, and finally fasten lath.

Another building life hacking. User were old, but reliable pillars within the section, at a distance of more than 3 meters from each other. A Planck length is exactly 3 m. What to do? To dig and rearrange columns - is not an option. Do lag too. The user found a way out - set intermediate vertical and horizontal wooden supports at the corners, and then attached to them laths. How this is done is well understood from the photos below.

Tips and tricks

At the end of the material are some tips from kazimir1:

• Old wooden fence was covered with protective impregnation, which completely hammered texture larch. Therefore, we use a special oil for wood, which emphasize the texture of Planck. Compare. Wood old fence.

And this, Planck oiled. As they say - two big differences.

• Poles for the fence painted with powder paint.

But the sliding door to the chamber of the furnace is not polarization climbed and painted metal expensive branded ink, which can be, according to the instructions, apply even rust. Result: after winter it is peeled off.

• Gate could do more "invisible", if you take the four-meter strips and saw off from it 1 meter. Then continue the overall texture of the transition blade fence at the gate and will not be differences in color and texture boards.

More photos of the fence and sliding doors, paneled larch plankenom.

conclusions

Fence of the bar can not be called budget option fencing section. It is necessary to periodically renovate oil (every 5-7 years). But the fence still performs an aesthetic function. He should be in harmony with the front trim of the house. Therefore, choose from the options offered by us.

Ask a Question kazimir1 It can be in the subject "Horizontal fence with a sliding gate of the bar on screw piles". We also recommend the article:

• Building a fence made of profiled sheet: A detailed calculation of wind loads on the blade and features independent enclosure mounting.
• Fence edging the board with their own hands. Technology and stages of self-construction of beautiful wooden fence.
• Cheap fence to give their own hands. Independent manufacturing process from "A" to "Z" of inexpensive construction fence mesh.
• Budget sliding doors with their hands. Portal users share their experiences and manufacturing drawings cheap and simple sliding gates.
• DIY: beautiful fence made of wood and stone. Step by step instructions for self-construction of the original fence with stone pillars and wooden filling spans.

In the video - foot fence made of clay and straw for a penny.

Subscribe to the channel! Join FORUMHOUSE - the best portal on the construction and country life!