How not to build a frame house, to not get RSK

How not to build a frame house

Abbreviation RSK in the construction industry appeared on our website, where "went to the World" with a light hand members of the forum. And today its interpretation is unambiguous.

Aleksey_Ermakov

Member FORUMHOUSE

DGC - a terrible karkashen Rushen, that is, the Russian karkasnik all violations of the joint venture. I did not know before coming to Forumhaus.

While traditionally it all began - with good intentions, only they have brought, as usual, is not in that steppe, once again proving that the best the enemy of good. And why it happened and how to build a frame house was, and not try to understand RSK.

Content

• How did the RSK
• Why not reinvent the wheel
• The main reasons that turn a reliable and durable frame to the RNC

How did the RSK

In respect to the already distant 2008, almost "dawn" karkasostroeniya in the country, on the forum appeared quite pretentious topic: "How to build a Russian frame house ...". Topikstarter positioned himself the "father" of the domestic technology frame housing with the abbreviation RCC, which stands for Russian power frame.

dnd

Member FORUMHOUSE

So, I could not stand the poet's soul, I did not wait for the end of construction - too many questions from the people. I start laying the photos from the construction of houses on technology RUSSIAN POWER STRUCTURE - RSK (trade name) from the company, of which I am, advertising in the next branch! The article does not carry advertising, and the only explanation is that the RSK and how he is going.

Since at the time of the current abundance of theories and thousands of case studies on frame housing either on our site or in the network as a whole, was not observed, the subject went to cheer. Despite the fact that it postulates voiced run counter to the classic, proven technology generations, and Canadian (American) frames, considered a benchmark throughout the world, dnd recognized "flimsy, loose and crooked to the side." Accordingly, "through a long and continuous suffering from US-Canadian technologies" he came to an enhanced and constructive fortified own invention. Basis:

• a frame structure of the timber (except the sill);
• platform denial;
• docking elements almost without gashes and frames, planes;
• fixture on the screws and metal corners.

In addition, the proposed framework version of demanding to the base - the foundation should be bridges that are based load-bearing walls and floor beams.

Some time in the subject went stormy discussion, upload photos of the build process at home.

As more and more willing to build on the Russian power frame technology, although adherents of traditional karkasnikov tried periodically to express doubts about the feasibility of "innovation".

Decoupling also staggered trust force to the frame, to convert it into the framework of the domestic discharge "Third grade, not marriage" has become synonymous with the construction disorders occurred unexpectedly and to the maximum rigid form.

Solariss

Member FORUMHOUSE

... Despite the problems with the team (washed down and left the facility, taking the tool), the construction continued, which indicated that inflexibility will and generosity of the author. At this point, the theme acquires twist that does not dream of the writer action-packed novels: Our hero, the author of advanced technologies, and in general, the conqueror of our hearts, the idol of our forum - disappeared. And not just disappeared, and, judging by the fragmentary data (where, it seems, in detail, but I missed), taking with him acquired by overwork hopes and aspirations of its customers.

On the forum dnd around the same time blocked, lost interest in the subject, and RAC is now, with rare exceptions, is associated with the hack.

Why not reinvent the wheel

By and large, the proposed variation is quite viable, and of timber frames is also collected. The only difference is that the lumber frame Timber Frame (TB timberfreym), a separate subspecies. His sense of aesthetics - all bearing elements remain in view as the accent of interior; and practicality - a layer of insulation laid over a purlin power carcass completely overlapping cold bridges.

Here - unjustified cost overruns lumber, coupled with dubious structural strength; if a traditional frame the main burden falls on the boards themselves, the RSC - on the screws and corner. Americans and Canadians like the founders frame technology, and Scandinavia as creators several "lite" versions, are used only for the frame board 38 × 140 × 150 mm or 50 mm. For studs and boards corner posts geminate / tunable (or crashed bolt) openings amplify Header (edgewise board), and the rigidity is provided by embedded struts of plate and plating.

If the framework is assembled correctly, it does not need strengthening beams, brackets and similar fasteners, except for fixing elements of roof system. Screws at the frame assembly is not just not used - are prohibited for use because of its properties.

denisvin79

Member FORUMHOUSE

And if such a critical frame is assembled on the screws? Well, except the code of course.

Roracotta

Member FORUMHOUSE, guru frame housing

What is so critical to wear pants over his head? Violation of construction - always critical. Screws burst of stress, due to their hardened. Nails softer and well keep the load on the shift.

CODE - Building Codes, the Code, a set of rules governing the construction of frame houses in the US and Canada. Unfortunately, for there the builders practically "bible", whereas in reality our counterpart - SP 31-105-2002, for some "training manual, which hangs in the tabs", and for others, only "Filkina Merit. "

denisvin79

Let me tell you a secret - there are no rules of construction. We live on the edge. And what is the load on the screws (the house someone pulls up to the roof), the frame counter in principle be able to rest under the CAP to pull together and gypsum board.

Roracotta

You suddenly decided to argue with me about the frame technology and construction standards? Build you even for clips, though on the blue tape. Show all these people who are trying to comply with the rules of construction, upper class housing! Prove striking example uselessness of these papers on SNIP and codes. Convince all that scary-Rushen-karkashen a head taller, safer and better, all those of foreign karkasnikov built on technology.

No, it's not a secret domestic construction realities and rasheny-Straseni - one of the main reasons for the negative attitude of inhabitants to frame houses.

The main reasons that turn a reliable and durable frame to the RNC

In each case, options nakosyachit - weight, but you can make a selection of typical violations.

• Substandard materials - lead timber, and then humidity, and the section does not correspond to the load.
• Insufficient insulation - application of insulating materials of smaller thickness, without reference to the heat resistance specifications, region and the specific application.
• Failure assembly technology - absence Header, mismatch struts of the first and second floor, no elements ensuring stability.

mfcn

Member FORUMHOUSE

Frame house must necessarily contain components which ensure its structural stability. Racks sheathed with horizontal / vertical boards - do not pass. Such unstable structure in a plane and can "parallelogram".

Major decisions:

• Slab cladding of the frame, internal or external. Typically, SIR (9-12 mm).
• Jib. Usually from dyuymovka, performed with a hole in the rack and piping.
• Sheathing angle (usually under external 45⁰), variation "herringbone". Often from dyuymovka.

Non-standard solutions - MDF paneling angles, jib only rest against the corner posts made of lumber, etc...

Structural stability of the walls, it is not only the protection of the house from the dam, but also increasing the vibration resistance of the house, which is especially important for homes in several floors. Disregard for the structural stability leads to disastrous consequences.

• Failure to comply with structural elements.

denxxxxx

Member FORUMHOUSE

For me, it imposed a very complex and expensive, "sandwiches" and the incredible thickness of 200 mm of insulation. I do not impose, but the cheapest I turned the frame such that the inside> outside: 12 mm plasterboard, ecowool falls asleep on top, 150 mm, OSB 12 mm, and that's all. No steam wind insulation, costing hundreds of oil is not necessary. For ecowool not frozen in Siberia, even when -40⁰S. In winter, -32⁰S I did drink a case of ventilation pipe 110, took the cut and the dew point was 2 cm after RSD, that is, until the middle is not reached even in very humid room - bathroom. I have three objects, and there are no problems on the carcass moisture due to lack of a vapor barrier. Moisture will still need to produce like something out of the room.

Moisture removed from the room due to ventilation and vapor barrier designed to protect insulation and frame.

Popson

Member FORUMHOUSE

denxxxxx, is physics, my friend, a physicist. Do not take into account the water vapor pressure - sooner or later, rots inside the frame. FLIR will winter very well seen. The partial vapor pressure, absolute pressure - that it is necessary to take into account not take. That's the essence of professionalism. Optionally thoroughly study the theory of Mendeleev-Clapeyron, but to consider - certainly. It's like raising the grade of wood mechanical and chemical treatments, all for the good! Yes, more expensive. But you have to pay for the quality of life, or - the dugout and being in trogloditski. Good luck with business!

Violation of technology construction of frame houses occur for two main reasons:

• ignorance - "treated" the study of the theory, including regulatory documents, books and videos, as well as articles and specialized topics in the forum. In the case where the duplicated unwillingness to know - terminally.
• desire to save money, regardless of the consequences - usually duplicated conviction in their own right and hope to chance.

Vasiliy06031978

Member FORUMHOUSE

Remove from the normal two-thirds of the carcass laid lumber, MDF paneling, put in place the right membranes the cheapest the film, buy glass wool roll insulation - it is also half the price instead of OSB flooring, Flooring Sun. Of course, the house will be cheaper than the normal two times, that's just a house it is difficult to call. I, however, know very well what I'm talking. I have a mother-in-villa with the father, is such a "but cheap" is the correct structural arrangement karkasnik - heaven and earth just. Fundamentally different structure. Although such a technology.

Output

Contrary to popular belief, karkasnik - this is not the way to spend a minimum to get the maximum. In the application of high quality materials and compliance technology and structural elements, the house can even get more expensive brick / stone. But also on the characteristics he would not give in, and will serve more than one generation. But when an end in itself - budget cuts, and at the expense of wet wood and poor insulation, and neglect regulations, it turns out, just, terrible karkashen Rushen. As in everything - everyone chooses for himself.

In an earlier thematic material - the classic technology frame housing. On the small but very interesting karkasnike - article "Budget and nice house with a mezzanine and a second light: photo». In the video - of frame houses in pastel colors on a hill.

What do you prefer, the frame house or RSK "but cheap"?

Subscribe to the channel to join FORUMHOUSE, The best portal on the construction and country life!