How to make a window "is not sweating." Simple Tips to get rid of condensation on the plastic windows.

With the onset of autumn begin to appear on the windows drop. The colder it gets outside, the more moisture there is in the glass. Sometimes even have to remove the water from the window sill with a cloth. This is very frustrating for owners of the house. If a lot of moisture, it can even be formed mold on the wallpaper, and this is dangerous for the health of residents. Dampness in the room leads to the fact that all things in the closets become wet and smell bad. Breathe in these rooms is not very easy, especially for people suffering from asthma.

When I was faced with a similar problem, I decided to conduct its own investigation, I examined the available information on the Internet and questioned experts on the installation of plastic windows on how to deal with condensate. Here's what I found out:

Firstly, there is such a thing as "dew point." This means that the water from the gaseous state into a liquid and drains to the sill. This usually occurs during the cold season. temperature difference and humidity outdoors and indoors is the cause of dew point.

Secondly, the quality of the windows and the correctness of their installation plays a very important role in solving this problem. If installers have done everything correctly and accurately, the window will never be covered with condensation in any weather. If you sills wet, then you're out of luck and you have purchased is not too good windows.

Thirdly, it is necessary to ventilate the room in any weather. Enough to lift the window of 10-15 minutes to avoid fogging and condensation.

If all else fails, you must replace the windows. It is advisable to choose a higher price. When the financial situation does not allow for a substitution, arm cloth, and get ready to wipe the window sills almost every day.

If you have been helpful, our article please put your finger up and do not forget to subscribe. Until we meet again!